暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR3 server memory module with gold contacts and black chips

A-Tech

A-Tech 64GB DDR3 1600 ECC LRDIMM 8Rx4 Server Memory

SKU CH-98CM-SXB5N

64 GB DDR3 1600 ECC LRDIMM server module with CL11 latency and 1.50 V operation

  • Capacity64GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 64GB capacity expands server memory headroom for heavy workloads
  • DDR3 1600 speed with CL11 latency delivers responsive data throughput
  • ECC load-reduced design maintains signal integrity on high-density modules
  • 5V standard voltage ensures compatibility with existing DDR3 infrastructure
  • 240-pin DIMM form factor fits compatible server memory slots

Server memory upgrade

This 64 GB DDR3 module is built for servers and workstations that need high-density registered memory. It uses a load-reduced DIMM design to support large capacities per slot. The part replaces Hynix HMTA8GL7AHR4C-PB and HMTA8GL7MHR4C-PB modules. It is intended for administrators expanding memory in compatible enterprise systems.

8Rx4 load-reduced organisation

The module implements an 8Rx4 rank structure with ECC error correction. This organisation determines whether the system memory controller can address the full 64 GB capacity. Verify that your platform supports LRDIMM 8Rx4 modules before purchase. Incompatible controllers will not recognise the memory.

Standard DDR3 voltage and thermals

The module operates at the standard 1.5 V DDR3 voltage. Load-reduced buffering reduces electrical load on the memory bus, which helps limit heat output in densely populated slots. Typical airflow in a server chassis is sufficient for normal operation. No additional cooling measures are required.

特長

  • 64GB capacity expands server memory headroom for heavy workloads
  • DDR3 1600 speed with CL11 latency delivers responsive data throughput
  • ECC load-reduced design maintains signal integrity on high-density modules
  • 5V standard voltage ensures compatibility with existing DDR3 infrastructure
  • 240-pin DIMM form factor fits compatible server memory slots

仕様

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMTA8GL7AHR4C-PB, HMTA8GL7MHR4C-PB
Capacity64GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredLoad Reduced
Rank8Rx4
ChipsetMajor Brand Chipset
FeaturesHMTA8GL7AHR4C-PB, HMTA8GL7MHR4C-PB

この商品に関する質問

How does 64 GB in a single LRDIMM behave once installed in a server?

The 64 GB capacity appears as one large addressable bank, letting the operating system allocate memory for virtual machines or large data sets without spreading the load across multiple slots.

What does the DDR3 1600 PC3-12800 interface limit in practice?

The DDR3 1600 interface caps the peak transfer rate at the PC3-12800 specification, so sustained throughput cannot exceed that ceiling even if the memory controller runs faster.

What physical slot and clearance does the 240-pin DIMM need?

The module uses a 240-pin DIMM form factor and requires a standard DDR3 server slot with enough vertical clearance for the tall LRDIMM heatsink.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。