暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 ECC UDIMM modules with gold contacts and black chips

A-Tech

A-Tech 8GB (2x4GB) DDR4 2133 ECC UDIMM 1Rx8 1.2V 288-pin Server RAM

SKU CH-3S3A-H1PPZ

ECC unbuffered DDR4 kit adds 8 GB at 2133 MHz with CL15 latency for servers and workstations

  • CAS LatencyCL15
  • Rank1Rx8
  • 8GB dual-channel kit expands server memory capacity
  • 2133 MHz DDR4 speed accelerates data throughput
  • ECC unbuffered design detects and corrects single-bit errors
  • Single-rank 1Rx8 organisation improves memory controller efficiency
  • 2 V standard voltage reduces power draw per module

Server DDR4 ECC UDIMM kit

This A-Tech kit provides 8 GB of DDR4 ECC unbuffered memory in two 4 GB modules. It is built for servers and workstations that require error-correcting code RAM and will not work in standard desktop or laptop computers.

Single-rank 1Rx8 organisation

Each module uses a 1Rx8 single-rank layout with CL15 latency at 2133 MHz. The rank configuration is the critical specification that determines whether your server’s memory controller can populate all slots at the rated speed.

Standard-voltage thermal profile

The modules run at the DDR4 standard 1.2 V, keeping power draw and heat output low in typical server workloads. Unbuffered ECC DIMMs of this density operate quietly with passive cooling in properly ventilated chassis.

特長

  • 8GB dual-channel kit expands server memory capacity
  • 2133 MHz DDR4 speed accelerates data throughput
  • ECC unbuffered design detects and corrects single-bit errors
  • Single-rank 1Rx8 organisation improves memory controller efficiency
  • 2 V standard voltage reduces power draw per module

仕様

CAS LatencyCL15
Rank1Rx8

この商品に関する質問

What does 2133 MHz mean once this kit is installed in a server?

The modules run at DDR4-2133 with CL15 timing, giving each 4 GB stick a peak transfer rate of PC4-17000 for faster data access in compatible systems.

How does the ECC UDIMM interface limit what this memory can do?

ECC UDIMM adds single-bit error correction without buffering, so it works only in servers and workstations that support unbuffered ECC — not in standard desktops or laptops.

What physical slot and clearance does this 288-pin DIMM need?

Each stick fits a standard DDR4 288-pin DIMM socket at 1.2 V; verify your board’s channel layout and heatsink clearance before seating both modules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。