暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 8GB (2x4GB) DDR4 2133MHz CL15 288-Pin Desktop RAM Kit

SKU CH-F7G7-6C504

An 8 GB dual-channel kit of DDR4 2133 MHz desktop memory running at 1.2 V with CL15 timing on 288-pin DIMM modules

  • Capacity8GB (2 x 4GB)
  • SpeedDDR4 2133 (PC4 17000)
  • Tested Frequency2133
  • Voltage1.20V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Speed DDR4 2133 (PC4 17000)

  • 8GB dual-channel kit doubles bandwidth for smoother multitasking
  • DDR4 2133MHz speed keeps data flowing to the CPU
  • CL15 latency reduces wait cycles for faster response
  • 2V standard voltage cuts power draw and heat
  • 288-pin DIMM fits any desktop board with DDR4 slots

Kit composition and fit

This kit supplies two 4 GB DDR4 modules for a total of 8 GB. It targets desktop owners who want a straightforward memory increase without configuration steps. The CL15 timing and 1.20 V operation keep the kit within standard DDR4 limits for broad platform acceptance.

Motherboard integration

Each stick uses the 288-pin UDIMM form factor and runs at 2133 MHz (PC4-17000) without requiring manual voltage changes. Unbuffered, non-ECC design means the modules plug directly into consumer desktop slots and leave all four channels free for future expansion if the board provides them.

Testing and support impact

Every module passes individual validation before shipping, reducing the chance of DOA sticks that stall a build. A lifetime warranty and US-based technical support give a direct path to replacement or troubleshooting if a compatibility question arises after installation.

特長

  • 8GB dual-channel kit doubles bandwidth for smoother multitasking
  • DDR4 2133MHz speed keeps data flowing to the CPU
  • CL15 latency reduces wait cycles for faster response
  • 2V standard voltage cuts power draw and heat
  • 288-pin DIMM fits any desktop board with DDR4 slots

仕様

BrandA-Tech
SeriesA-Tech DDR4 Desktop Memory RAM
Capacity8GB (2 x 4GB)
SpeedDDR4 2133 (PC4 17000)
Tested Frequency2133
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Recommend UseAMD & Intel Compatible

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this kit work with my motherboard that has four DDR4 slots?

The kit contains two 288-pin DDR4 DIMMs. Install them in the same-colour slots to run in dual-channel mode; check your motherboard manual for the correct pair.

My system only supports 1.2 V memory — is this kit compatible?

Yes, these modules operate at the standard DDR4 voltage of 1.20 V, matching the requirement.

Does the CL15 latency matter for everyday use?

CL15 is the CAS latency at 2133 MHz; lower latency can slightly improve responsiveness in latency-sensitive tasks.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。