暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR3-1333 ECC RDIMM 2Rx4 1.5V Server RAM

SKU CH-YMWY-XPHNX

An 8 GB registered DDR3-1333 ECC module with CL9 latency and 1.5 V operation for server memory upgrades

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in critical workloads
  • Registered design reduces electrical load for stable server operation
  • 8 GB capacity expands memory headroom for virtualisation
  • DDR3 1333 MHz speed matches PC3-10600 system requirements
  • 5 V standard voltage ensures broad platform compatibility

8GB DDR3-1333 ECC Registered DIMM

This A-Tech module provides eight gigabytes of DDR3 server memory rated at 1333 MT/s with a CL9 latency. It operates at the standard 1.5 V and uses a registered 2Rx4 organisation with ECC for error correction. The 240-pin DIMM is built as a compatible replacement for several Micron part numbers.

Suited for DDR3 servers needing registered ECC

This module fits systems that require registered DDR3 DIMMs with error-correcting code support. It is not for desktop boards that accept only unbuffered non-ECC memory. Buyers who need higher speeds, lower voltage, or greater density per slot should look at other options.

Verify DDR3 registered DIMM support and slot count

Check that your motherboard or server chassis lists DDR3 registered DIMM compatibility and the maximum module capacity per slot. Confirm the total number of available 240-pin slots and any population rules for multi-rank modules. Ensure the system BIOS is current for full memory recognition.

特長

  • ECC protection prevents data corruption in critical workloads
  • Registered design reduces electrical load for stable server operation
  • 8 GB capacity expands memory headroom for virtualisation
  • DDR3 1333 MHz speed matches PC3-10600 system requirements
  • 5 V standard voltage ensures broad platform compatibility

仕様

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT36JDZS1G72PZ-1G4D1AD, MT36JFS1G72PZ-1G4M1, MT36JSZF1G72PZ-1G4D1DD, MT36JSF1G72PZ-1G4K1FF, MT36JSF1G72PZ-1G4M1FE
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
FeaturesMT36JDZS1G72PZ-1G4D1AD, MT36JFS1G72PZ-1G4M1, MT36JSZF1G72PZ-1G4D1DD, MT36JSF1G72PZ-1G4K1FF, MT36JSF1G72PZ-1G4M1FE

この商品に関する質問

Does my motherboard need to support DDR3-1333 ECC registered DIMMs for this 8GB module to work?

Yes, the system must accept DDR3-1333 PC3-10600 ECC RDIMM memory running at 1.5V with a 2Rx4 rank configuration.

Can I mix this 1.5V registered ECC module with older unbuffered non-ECC DDR3 sticks?

No, registered ECC modules require a compatible chipset and cannot operate alongside unbuffered non-ECC memory.

How do I confirm the 8GB DDR3-1333 module is recognised at the correct speed after installation?

Check the BIOS or operating system memory information; it should show 8GB at 1333MHz with ECC and registered status active.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。