暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR3 ECC RDIMM module with black memory chips and gold 240-pin edge connector

A-Tech

A-Tech 8GB DDR3 1333 ECC RDIMM 2Rx4 Server Memory

SKU CH-QFZX-VBNBH

8GB DDR3 1333MHz ECC registered DIMM with 2Rx4 organisation for server upgrades

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB DDR3 capacity handles heavier server workloads
  • 1333MHz speed with CL9 latency delivers responsive data access
  • ECC registered design detects and corrects memory errors
  • 5V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits DDR3 server slots

8GB DDR3 ECC RDIMM for Servers

This 8GB DDR3 1333MHz module is built for server and workstation systems that require error-correcting registered memory. It replaces Nanya part numbers NT8GC72B4NB1NJ-CG, NT8GC72B4NB1NK-CG, NT8GC72B4NG0NK-CG and NT8GC72B4NG0NL-CG. The 2Rx4 organisation and CL9 latency suit typical enterprise workloads. Systems without ECC RDIMM support cannot use this module.

Registered DIMM with 240-pin interface

The registered design adds a buffer that reduces electrical load on the memory controller, allowing larger memory populations in multi-socket boards. A standard 240-pin DDR3 DIMM keying ensures mechanical compatibility with DDR3 server slots. Operation at 1.5V matches the DDR3 specification. Modules that demand a different voltage or unbuffered signalling will not function in the same slots.

Lifetime warranty and US-based support

A-Tech backs every module with a lifetime warranty and provides complimentary United States technical support before, during and after purchase. Each unit undergoes quality assurance testing to verify reliable operation. Buyers who need on-site spares contracts or vendor-specific firmware validation should look elsewhere.

特長

  • 8GB DDR3 capacity handles heavier server workloads
  • 1333MHz speed with CL9 latency delivers responsive data access
  • ECC registered design detects and corrects memory errors
  • 5V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits DDR3 server slots

仕様

BrandA-Tech
SeriesCompatible Replacement for Nanya
ModelNT8GC72B4NB1NJ-CG, NT8GC72B4NB1NK-CG, NT8GC72B4NG0NK-CG, NT8GC72B4NG0NL-CG
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesNT8GC72B4NB1NJ-CG, NT8GC72B4NB1NK-CG, NT8GC72B4NG0NK-CG, NT8GC72B4NG0NL-CG

この商品に関する質問

Does this DDR3 1333 module run at the full PC3-10600 data rate on a server board?

Yes, the stick is rated DDR3 1333 MHz PC3-10600 and will operate at that transfer rate when the platform supports it.

Will the 240-pin registered DIMM fit a standard server memory slot?

The module uses the 240-pin DDR3 DIMM form factor with registered signalling, matching typical server DIMM sockets.

What is the correct way to seat this ECC RDIMM and what step is often missed?

Align the notch with the slot key, press firmly until both retention clips click, and ensure the registered buffer is recognised by the BIOS before booting the OS.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。