暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3 DIMM with black chips and gold contacts

A-Tech

A-Tech 8GB DDR3 1333MHz ECC UDIMM 2Rx8 Hynix HMT41GU7AFR8C-H9 server RAM

SKU CH-CRPB-M2FT0

ECC unbuffered DDR3 server module with 8 GB capacity, 1333 MHz speed and 240-pin DIMM form factor

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity in servers
  • 8GB capacity expands memory for heavier workloads
  • DDR3 1333MHz speed matches PC3-10600 systems
  • 240-pin UDIMM form factor fits standard server slots
  • 5V operation meets DDR3 standard voltage

8GB DDR3 ECC UDIMM for servers

This 8GB DDR3 1333MHz ECC UDIMM module is built for servers and workstations that require error-correcting memory. It uses a 240-pin DIMM form factor and operates at a standard 1.5V voltage. The module is designed as a direct replacement for specific Hynix part numbers including HMT41GU7AFR8C-H9 and related variants.

Replaces legacy DDR3 ECC modules

It upgrades systems currently running lower-capacity DDR3 ECC UDIMMs or fills empty slots on compatible motherboards. The jump is worth it when the platform supports 1333MHz operation and the workload demands ECC data integrity. Systems limited to slower DDR3 speeds or non-ECC memory will not benefit from this module.

8GB capacity with dual-rank organisation

The 8GB capacity and 2Rx8 configuration provide headroom for virtualisation hosts, database servers, and multi-user workloads. It handles typical server duties such as file serving and application hosting comfortably. Workloads requiring larger per-slot densities or registered DIMM support will exceed what this unbuffered module can provide.

特長

  • ECC protection guards data integrity in servers
  • 8GB capacity expands memory for heavier workloads
  • DDR3 1333MHz speed matches PC3-10600 systems
  • 240-pin UDIMM form factor fits standard server slots
  • 5V operation meets DDR3 standard voltage

仕様

BrandA-Tech
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Will this 240-pin DDR3 DIMM fit my server's UDIMM slots?

Yes, it is a standard 240-pin DDR3 DIMM built to the UDIMM form factor, so it fits any server or workstation board that accepts unbuffered ECC DDR3 modules.

What is the correct way to seat the module and the step most people miss?

Align the notch with the slot key, press straight down until both side clips snap shut, then verify the system reports the full 8 GB at 1333 MHz in BIOS.

When should I expect to replace this ECC UDIMM?

DDR3 server memory has no scheduled replacement interval; swap the module only if memtest or the system logs report correctable or uncorrectable ECC errors.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。