暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold contacts along the bottom edge and black memory chips on both sides

A-Tech

A-Tech 8GB DDR3 1600 ECC RDIMM 1Rx4 1.5V 240-Pin Server RAM

SKU CH-SQ1E-JWDNZ

8GB DDR3 1600 ECC registered DIMM with CL11 latency and 1.5V operation for server and workstation memory upgrades

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 8GB

Speed DDR3 1600 (PC3 12800)

  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR3 1600 MHz speed accelerates data throughput in compatible systems
  • ECC registered design detects and corrects single-bit errors automatically
  • Single-rank 1Rx4 layout simplifies channel population rules
  • Standard 1.5V voltage matches DDR3 platform requirements

Server ECC Registered Memory

This A-Tech module is an 8GB DDR3 1600 MHz ECC RDIMM built for servers and workstations that require registered memory. It operates at 1.5V standard voltage with CL11 latency and uses a single-rank x4 organisation. The 240-pin DIMM form factor fits compatible DDR3 server platforms only and will not work in desktop or laptop computers.

Registered DIMM for multi-module configs

Registered buffering reduces electrical load on the memory controller, allowing larger memory populations in multi-socket server boards. ECC capability detects and corrects single-bit errors to maintain data integrity for critical workloads. The module requires a platform that explicitly supports DDR3 RDIMM; it cannot be used in systems limited to unbuffered memory.

Standard voltage DDR3 thermals

At 1.5V the module runs at the standard DDR3 voltage, producing typical heat output for registered server memory. No additional cooling beyond normal server airflow is required, and power draw remains within the DDR3 1600 specification. Acoustic contribution is negligible in a properly ventilated chassis.

特長

  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR3 1600 MHz speed accelerates data throughput in compatible systems
  • ECC registered design detects and corrects single-bit errors automatically
  • Single-rank 1Rx4 layout simplifies channel population rules
  • Standard 1.5V voltage matches DDR3 platform requirements

仕様

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 1Rx4 PC3-12800R
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What CAS latency will the module run at under sustained load?

The module operates at CL11 latency as specified for DDR3 1600 operation.

How much heat and power does an 8 GB registered DIMM draw when running continuously?

Each stick runs at the standard 1.5 V DDR3 voltage; registered buffering adds minimal overhead compared with unbuffered modules.

Which server or workstation platforms accept this 240-pin DDR3 registered ECC memory?

It fits any system that supports DDR3 1600 MHz PC3-12800R registered ECC DIMMs — check your manual for slot population rules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。