暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR3 server memory module with gold contacts and black chips

A-Tech

A-Tech 8GB DDR3 1600MHz PC3-12800 ECC RDIMM 2Rx4 Server RAM

SKU CH-5W8T-VB32P

8GB DDR3 1600MHz ECC registered server memory module with 2Rx4 organisation and 1.5V operation

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption with registered DDR3 architecture
  • 1600 MHz speed accelerates server workloads at PC3-12800 bandwidth
  • 5 V operation matches standard DDR3 voltage for broad compatibility
  • 2Rx4 dual-rank layout maximises memory density per 240-pin module
  • Direct replacement for five Micron part numbers ensures drop-in fit

8GB DDR3 ECC RDIMM for servers

This 8GB DDR3 module runs at 1600MHz with a PC3-12800 rating and CL11 latency. It is a registered ECC DIMM built for server and workstation platforms that require error correction and signal buffering. The 2Rx4 organisation suits multi-channel configurations in compatible systems.

240-pin DIMM with Micron chipset

The module uses a 240-pin DDR3 DIMM form factor and operates at the standard 1.50V. Registered buffering reduces electrical load on the memory controller, which helps stability when multiple modules are populated. Verify your platform supports registered ECC DDR3 before installation.

Standard voltage and registered design

At 1.50V the module follows the DDR3 JEDEC voltage spec, so power draw stays within normal limits for this generation. Registered operation adds minimal latency while improving signal integrity in dense memory arrays. No additional cooling is required beyond typical server airflow.

特長

  • ECC protection prevents data corruption with registered DDR3 architecture
  • 1600 MHz speed accelerates server workloads at PC3-12800 bandwidth
  • 5 V operation matches standard DDR3 voltage for broad compatibility
  • 2Rx4 dual-rank layout maximises memory density per 240-pin module
  • Direct replacement for five Micron part numbers ensures drop-in fit

仕様

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT36JSF1G72PZ-1G6K1FE, MT36JSF1G72PZ-1G6K1FF, MT36JSF1G72PZ-1G6K1HE, MT36JSF1G72PZ-1G6K1HF, MT36JSF1G72PZ-1G6K1HG
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
FeaturesMT36JSF1G72PZ-1G6K1FE, MT36JSF1G72PZ-1G6K1FF, MT36JSF1G72PZ-1G6K1HE, MT36JSF1G72PZ-1G6K1HF, MT36JSF1G72PZ-1G6K1HG

この商品に関する質問

Does the DDR3 1600 PC3-12800 interface limit the module to CL11 timing?

The module runs at DDR3 1600 MHz with a CAS latency of CL11, which is the rated speed and timing for this PC3-12800 registered DIMM.

Will the 240-pin DIMM fit a standard server memory slot?

This is a 240-pin DDR3 DIMM built to the registered ECC form factor used in compatible server and workstation platforms.

Is there a specific orientation step when installing this registered ECC module?

Align the notch on the 240-pin DIMM with the key in the slot, press firmly until both retention clips click, and ensure the registered buffer seats fully.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。