暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 8GB DDR3 1866 ECC RDIMM 1Rx4 for Kingston D1G72L131 server RAM

SKU CH-WTVG-V7237

8GB DDR3 1866 ECC registered server memory module with CL13 latency, 1.5V operation, 1Rx4 rank and 240-pin form factor

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR3 1866MHz speed accelerates data throughput in compatible systems
  • ECC RDIMM design detects and corrects single-bit errors automatically
  • Registered buffer reduces electrical load on the memory controller
  • 1Rx4 rank layout optimises signal integrity at 1.5V operation

8GB DDR3 1866 ECC RDIMM 1Rx4 Server Memory

This 8GB DDR3 1866MHz PC3-14900 module is a registered ECC DIMM built for server and workstation systems. It runs at 1.5V with CL13 latency and uses a 1Rx4 rank configuration on a 240-pin form factor. The kit replaces specific Kingston part numbers including D1G72L131 and KVR18R13S4K4/32.

Suits servers needing registered ECC DDR3 at 1866MHz

Buyers whose platforms require registered ECC DDR3 memory at 1866MHz with a 1Rx4 organisation will find this module compatible. Systems that only accept unbuffered UDIMMs, need a different voltage, or call for a different rank layout cannot use this DIMM. Verify the motherboard memory list before ordering.

Registered ECC with 1Rx4 rank layout

The single specification that decides fit is the registered ECC RDIMM design combined with the 1Rx4 rank structure. Only motherboards qualified for registered ECC DDR3 at this speed and rank will POST correctly with this module installed.

特長

  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR3 1866MHz speed accelerates data throughput in compatible systems
  • ECC RDIMM design detects and corrects single-bit errors automatically
  • Registered buffer reduces electrical load on the memory controller
  • 1Rx4 rank layout optimises signal integrity at 1.5V operation

仕様

BrandA-Tech
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Should I pick the 8 GB module or the 32 GB kit listed in the title?

This listing is for a single 8 GB module; the 32 GB reference is a Kingston kit of four 8 GB sticks that this part replaces.

What does the 1866 MHz speed mean once the DIMM is installed?

The module runs at DDR3 1866 with CL13 latency at 1.50 V, delivering the rated PC3-14900 bandwidth when the server memory controller supports that frequency.

Does the 240-pin registered ECC interface limit the maximum speed?

The 240-pin RDIMM form factor carries the DDR3 1866 signal; the registered buffer and ECC do not cap the speed below the rated 1866 MHz.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。