暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 8GB DDR3L 1333 ECC UDIMM 2Rx8 1.35V 240-Pin Server Memory

SKU CH-205B-AF7H8

An 8 GB DDR3L 1333 ECC UDIMM module running at 1.35 V with CL9 latency for 240-pin server systems

  • Capacity8GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR3L 1333 speed delivers responsive data throughput at PC3L-10600
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • 35V low-voltage operation reduces power draw and thermal load
  • 240-pin UDIMM form factor fits standard DDR3L DIMM slots

8GB DDR3L 1333 ECC UDIMM

This is an 8 GB DDR3L unbuffered ECC DIMM built to the PC3L-10600 standard at 1333 MHz with a CAS latency of CL9. It operates at 1.35 V low voltage and uses a 240-pin form factor with a 2Rx8 rank configuration. The module carries major-brand chips and is tested for server and workstation reliability.

Suited for servers needing low-voltage ECC

It fits systems that specifically accept DDR3L 1333 MHz ECC UDIMMs at 1.35 V. It is not for platforms that require registered or fully buffered DIMMs, nor for builds that need non-ECC memory or a different pin count.

1.35 V DDR3L voltage decides fit

The 1.35 V low-voltage specification is the single detail that determines whether this module will work in a given slot; systems wired for standard 1.5 V DDR3 or for other DDR generations will not accept it.

特長

  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR3L 1333 speed delivers responsive data throughput at PC3L-10600
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • 35V low-voltage operation reduces power draw and thermal load
  • 240-pin UDIMM form factor fits standard DDR3L DIMM slots

仕様

BrandA-Tech
Capacity8GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Does my server motherboard need a 240-pin DDR3L slot for this module?

Yes, it requires a 240-pin DDR3L DIMM slot supporting 1.35V operation.

Can I mix this 2Rx8 ECC UDIMM with existing single-rank DDR3L sticks?

Mixing ranks is possible but may limit the system to single-channel mode or lower speeds.

How do I confirm the module runs at 1333MHz CL9 after installation?

Check the BIOS memory info or OS tools like CPU-Z to verify DDR3-1333 CL9 timings.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。