OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
A-Tech
An 8 GB DDR3L 1333 MHz registered ECC server module matching Crucial CT8G3ERSLD41339 PC3L-10600 with 2Rx4 organisation and 1.35 V operation
This 8GB DDR3L module runs at 1333MHz with CL9 latency and 1.35V operation. It uses a 240-pin RDIMM form factor with ECC and registered buffering for server and workstation stability. The 2Rx4 organisation suits multi-slot configurations.
DDR3L voltage keeps thermals lower than standard DDR3 during sustained workloads. Registered buffering adds minimal electrical load on the memory controller. Passive cooling in typical server chassis is sufficient for normal use.
The module requires a platform that accepts registered ECC DDR3L DIMMs. It frees a single slot for 8GB of capacity and leaves remaining slots open for further expansion. Verify your system specifications before purchase.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Power down the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 1.35 V DDR3L 1333 MHz module is recognised and ECC is enabled.
No routine maintenance is required; the module either continues operating or develops correctable errors that ECC logs, at which point you replace the stick.
The 1333 MHz bus speed and CL9 latency cap throughput before voltage or thermal limits become a factor.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?