暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3L server DIMM with black chips

A-Tech

A-Tech 8GB DDR3L 1600 ECC RDIMM 1Rx4 240-Pin Server Memory

SKU CH-JD62-6SVE1

8GB DDR3L 1600 ECC registered DIMM with 1Rx4 organisation and 1.35V operation for server workloads

  • Capacity8GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC registered design protects data integrity in servers
  • DDR3L 1600 speed at 1.35V cuts power draw
  • Single-rank 1Rx4 layout fits dense 240-pin slots
  • Major-brand chips tested for dependable operation
  • Direct replacement for Kingston KTD-PE316LV/8G and related part numbers

8GB DDR3L 1600 ECC RDIMM

This 8GB DDR3L 1600 ECC registered DIMM fits servers and workstations that require 1.35V low-voltage memory with error correction. The 240-pin module uses a single-rank 1Rx4 organisation and CL11 timing. It is built with major-brand chips and tested for dependable operation in compatible systems.

Who this suits and who it does not

This module suits administrators upgrading or repairing systems that specifically call for DDR3L 1600 ECC RDIMM at 1.35V. Builders who need unbuffered UDIMM, a different voltage, higher capacity per slot, or a newer DDR generation should look at other parts.

The spec that decides fit

The registered ECC design with 1.35V DDR3L signalling is the single specification that determines whether this module will work in a given platform. Verify that the system documentation lists DDR3L 1600 RDIMM support before purchasing.

特長

  • ECC registered design protects data integrity in servers
  • DDR3L 1600 speed at 1.35V cuts power draw
  • Single-rank 1Rx4 layout fits dense 240-pin slots
  • Major-brand chips tested for dependable operation
  • Direct replacement for Kingston KTD-PE316LV/8G and related part numbers

仕様

BrandA-Tech
Capacity8GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Does my server need a 240-pin DDR3L slot that supports 1.35 V registered ECC modules?

Yes — this module is a 240-pin DDR3L RDIMM that runs at 1.35 V with ECC, so the motherboard must provide a registered DDR3L slot at that voltage.

Can I add this 1Rx4 RDIMM to a system that already has 2Rx4 DDR3L 1600 registered modules?

Mixing ranks is often supported, but the memory controller must allow mixed-rank populations; check the platform’s qualified-vendor list for 1Rx4 and 2Rx4 combinations at 1600 MHz.

How do I confirm the module is running at CL11 1600 MHz with ECC active after installation?

Enter the BIOS or use a hardware-information utility; it should report 1600 MT/s, CAS latency 11, 1.35 V and ECC enabled for the new DIMM.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。