暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3L UDIMM module with black memory chips and gold edge contacts

A-Tech

A-Tech 8GB DDR3L 1600 ECC UDIMM 2Rx8 1.35V Server RAM

SKU CH-QB2T-5QTF7

ECC unbuffered DDR3L server memory module with 8 GB capacity, 1600 MHz speed and 1.35 V operation

  • Capacity8GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity in server workloads
  • 35V DDR3L reduces power draw versus standard DDR3
  • 1600 MHz speed with CL11 latency supports responsive multitasking
  • 2Rx8 dual-rank layout maximises density per 240-pin DIMM slot
  • Drop-in replacement for Hynix HMT41GE7AFR8A-PB and HMT41GE7BFR8A-PB

8GB DDR3L ECC UDIMM for Servers

This 8GB DDR3L 1600 module is built for server and workstation systems that require error-correcting unbuffered memory. It serves as a direct replacement for Hynix HMT41GE7AFR8A-PB and HMT41GE7BFR8A-PB modules. The single stick adds 8GB of capacity to compatible platforms.

240-Pin Low-Voltage Unbuffered Design

The module uses a standard 240-pin DIMM form factor and operates at 1.35V, reducing power draw compared to standard DDR3. Its unbuffered design means it connects directly to the memory controller without a register, suitable for platforms that support unbuffered ECC. The 2Rx8 organisation uses major-brand chips.

Check DDR3L 1.35V and UDIMM ECC Support

Before ordering, verify that your system accepts DDR3L memory at 1.35V and supports unbuffered ECC UDIMMs. Confirm the motherboard or server documentation lists compatibility with 2Rx8 modules at 1600MHz. Systems requiring registered or fully buffered DIMMs cannot use this module.

特長

  • ECC protection guards data integrity in server workloads
  • 35V DDR3L reduces power draw versus standard DDR3
  • 1600 MHz speed with CL11 latency supports responsive multitasking
  • 2Rx8 dual-rank layout maximises density per 240-pin DIMM slot
  • Drop-in replacement for Hynix HMT41GE7AFR8A-PB and HMT41GE7BFR8A-PB

仕様

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMT41GE7AFR8A-PB, HMT41GE7BFR8A-PB
Capacity8GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesHMT41GE7AFR8A-PB, HMT41GE7BFR8A-PB

この商品に関する質問

Does DDR3L 1600 PC3L-12800 limit the maximum memory speed to 1600 MHz?

Yes, the module is rated for 1600 MHz and will not run faster than that on any system.

Will this 240-pin DDR3 UDIMM fit in a standard server DIMM slot?

The stick uses the 240-pin DDR3 UDIMM form factor, which matches regular server DIMM slots.

How is the ECC UDIMM installed and what step is often missed?

Align the notch with the slot key, press firmly until both side clips click, then verify in BIOS that ECC is enabled.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。