暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3L UDIMM with black chips, single 8GB module

A-Tech

A-Tech 8GB DDR3L 1600 ECC UDIMM 2Rx8 server RAM

SKU CH-QKK0-4W2Y4

8GB DDR3L 1600 ECC UDIMM 2Rx8 server memory module with 1.35V low-voltage operation for HP-compatible systems

  • Capacity8GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity with built-in error correction
  • Low 1.35 V DDR3L voltage cuts power draw and heat
  • 1600 MHz speed accelerates server workloads and multitasking
  • 2Rx8 dual-rank layout maximises 8 GB density per slot
  • Validated replacement for HP part numbers 713752-081, 713979-B21, 713980-B21 and others

A-Tech 8GB DDR3L ECC UDIMM

This 8GB DDR3L module runs at 1600MHz with CL11 latency and 1.35V operation. It uses unbuffered ECC chips in a 2Rx8 configuration on a 240-pin DIMM. The stick is built for servers and workstations that require error-correcting memory.

Fits HP part numbers including 713752-081

The module plugs into a standard DDR3 DIMM slot on a compatible motherboard. It frees a second slot for another 8GB stick if the board supports two channels. No registered buffer is present so the memory controller must accept unbuffered ECC UDIMMs.

Sustained load stability with ECC correction

Error-correcting code detects and corrects single-bit errors during continuous operation. The low 1.35V voltage reduces heat output during long compute runs. CL11 timing delivers consistent latency without the variability seen in overclocked modules.

特長

  • ECC protection guards data integrity with built-in error correction
  • Low 1.35 V DDR3L voltage cuts power draw and heat
  • 1600 MHz speed accelerates server workloads and multitasking
  • 2Rx8 dual-rank layout maximises 8 GB density per slot
  • Validated replacement for HP part numbers 713752-081, 713979-B21, 713980-B21 and others

仕様

BrandA-Tech
Capacity8GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Will the DDR3L 1600MHz speed and CL11 latency limit throughput during sustained server workloads?

The module runs at DDR3L 1600 (PC3L-12800) with CL11 latency; sustained throughput is capped by that 1600 MT/s data rate and the unbuffered 2Rx8 organisation.

How much heat and power does the 1.35V DDR3L module produce when running continuously in a server?

Operating at 1.35 V low voltage, the unbuffered ECC UDIMM draws less power and generates less heat than standard 1.5 V DDR3, easing cooling in 24/7 operation.

Does my motherboard need a 240-pin DDR3L slot that supports unbuffered ECC UDIMM 2Rx8 modules?

Yes — the DIMM is a 240-pin DDR3L 1.35 V unbuffered ECC UDIMM with 2Rx8 organisation; the board must accept that exact form factor, voltage and ECC type.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。