BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
A-Tech
8GB DDR3L 1866MHz SODIMM module runs at 1.35V with CL13 latency for laptop upgrades
This A-Tech module delivers 8GB of DDR3L memory at 1866MHz with CL13 latency and 1.35V operation. It uses the standard 204-pin SO-DIMM form factor and is built as an unbuffered, non-ECC stick. The part is a compatible replacement for Samsung M471B1G73EB0-YMA modules.
The stick suits owners of notebooks or all-in-one PCs that require low-voltage DDR3L SO-DIMM memory running at PC3L-14900 speed. It is not for desktop computers that use full-size DIMM slots, nor for systems that only accept registered or ECC memory configurations.
The single specification that determines compatibility is the 1.35V DDR3L voltage rating combined with 204-pin SO-DIMM form factor. A system must support DDR3L at 1.35V and accept unbuffered, non-ECC modules; otherwise the memory will not function correctly.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1866 (PC3L 14900) |
| CAS Latency | CL13 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
It runs at DDR3L 1866 MHz (PC3L-14900) with CL13 latency at 1.35 V.
A 204-pin DDR3 SO-DIMM slot; the key notch matches the standard DDR3 SO-DIMM location.
Power off the system, open the memory door, line up the notch with the slot key, insert the module at an angle until the contacts disappear, then press down until the side clips click.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?