暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 288-pin DDR4 RDIMM module with black chips

A-Tech

A-Tech 8GB DDR4 2133 ECC RDIMM 1Rx4 Hynix HMA41GR7AFR4N-TF HMA41GR7BJR4N-TF HMA41GR7MFR4N-TF Server Memory

SKU CH-6ZG9-1Z3JV

An 8 GB DDR4 2133 MHz registered ECC DIMM with CL15 latency and 1.2 V operation for server and workstation upgrades

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption with registered DDR4 design
  • 8 GB capacity expands server memory for heavier workloads
  • 2133 MHz speed at CL15 latency delivers responsive throughput
  • 2 V operation matches standard DDR4 voltage for efficient power use
  • 288-pin RDIMM form factor fits compatible server and workstation slots

8GB DDR4 2133 ECC RDIMM for servers

This 8 GB DDR4-2133 registered DIMM delivers ECC protection and a single-rank 1Rx4 layout for server and workstation platforms that require error-correcting memory. It operates at the standard 1.2 V DDR4 voltage and matches the specifications of Hynix HMA41GR7AFR4N-TF, HMA41GR7BJR4N-TF and HMA41GR7MFR4N-TF modules.

DDR4-2133 bandwidth and registered buffering

The module runs at 2133 MT/s (PC4-17000) with CL15 latency, limiting peak throughput to the DDR4-2133 ceiling. The registered buffer adds one clock cycle of address-command delay, which stabilises heavy loads but reduces raw speed compared with unbuffered DIMMs at the same data rate.

288-pin DIMM installation and compatibility checks

Insert the 288-pin DIMM into a compatible DDR4 RDIMM slot; the key notch prevents mis-orientation. The most common issue is a platform that does not support registered ECC modules or that requires a different rank configuration, so verify the system's qualified-vendor list before purchase.

特長

  • ECC protection prevents data corruption with registered DDR4 design
  • 8 GB capacity expands server memory for heavier workloads
  • 2133 MHz speed at CL15 latency delivers responsive throughput
  • 2 V operation matches standard DDR4 voltage for efficient power use
  • 288-pin RDIMM form factor fits compatible server and workstation slots

仕様

BrandA-Tech
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Should I choose the 8GB 1Rx4 module or a different capacity for my server?

This module is an 8GB DDR4 2133 ECC RDIMM with 1Rx4 organisation; select it when your platform requires a single-rank registered DIMM at this density.

What does the 2133 MHz rating deliver in an actual system?

The module runs at DDR4 2133 (PC4-17000) with CL15 latency at 1.20 V, providing standard server bandwidth and error correction for compatible platforms.

How does the DDR4 288-pin RDIMM interface limit performance?

The 288-pin registered DDR4 interface caps operation to the JEDEC 2133 MT/s data rate and requires a motherboard that supports ECC RDIMMs at 1.2 V.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。