暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 8GB DDR4 2133 ECC UDIMM 2Rx8 CL15 1.2V 288-Pin server RAM

SKU CH-5ZRM-2SKCT

8 GB DDR4 2133 MHz ECC UDIMM with CL15 latency, dual-rank x8 organisation and 1.2 V operation for servers and workstations

  • CAS LatencyCL15
  • Rank2Rx8
  • ECC protection prevents data corruption in critical workloads
  • CL15 latency at 2133 MHz DDR4 speed
  • Dual-rank 2Rx8 organisation increases memory density per slot
  • Standard 1.2 V DDR4 voltage reduces power draw
  • 288-pin UDIMM form factor fits compatible server and workstation boards

8GB DDR4 ECC UDIMM for servers and workstations

This 8GB DDR4 module runs at 2133 MHz with CL15 latency and 1.2V operation. It is built as a 2Rx8 dual-rank unbuffered DIMM with 288 pins for server and workstation platforms that require ECC memory. Desktop and laptop systems are not supported.

Straightforward DIMM installation

The module seats in a standard 288-pin DDR4 slot and requires no special tools or configuration beyond the system memory seating and channel guidelines in the server or workstation manual. Problems usually arise when the platform does not support ECC unbuffered memory or when population rules for dual-rank modules are ignored.

Verify ECC unbuffered DDR4 support before ordering

Check the system documentation to confirm the platform accepts DDR4 ECC UDIMM modules at 2133 MHz and can address 2Rx8 dual-rank sticks. Ensure the memory channel layout matches the module rank configuration and that the BIOS or firmware is current enough to recognise the module.

特長

  • ECC protection prevents data corruption in critical workloads
  • CL15 latency at 2133 MHz DDR4 speed
  • Dual-rank 2Rx8 organisation increases memory density per slot
  • Standard 1.2 V DDR4 voltage reduces power draw
  • 288-pin UDIMM form factor fits compatible server and workstation boards

仕様

CAS LatencyCL15
Rank2Rx8

この商品に関する質問

How can I confirm the module is running at CL15 after installation?

Check the BIOS memory timing table or a tool such as CPU-Z; the SPD should show CAS 15 at 2133 MHz.

What comes in the package and what must I source separately?

The box contains one 8 GB DDR4 2133 MHz ECC UDIMM 288-Pin module; no cables, brackets or additional parts are included.

Which capacity and rank should I choose for a dual-channel server board?

Select the 8 GB 2Rx8 module and populate matching slots per the motherboard manual to enable dual-channel operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。