BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
A-Tech
An 8 GB DDR4 DIMM running at 2133 MHz with CL15 latency and 1.2 V for HP desktop upgrades
This A-Tech module is an 8GB DDR4 2133MHz CL15 desktop DIMM built to replace HP part numbers 797346-581, 798034-001, 834932-001, 840817-001, P1N52AA and T0E51AA. It runs at 1.20V and uses unbuffered non-ECC chips.
Choose this kit when your HP desktop requires a single 8GB DDR4 2133MHz stick and the service manual lists one of the part numbers above. Skip it if your system needs ECC, registered modules, a different speed grade, or a capacity not offered here.
The tested frequency of 2133MHz with CL15 latency at 1.20V determines whether this module matches your motherboard's supported memory profile. Verify that figure against your system documentation before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Yes, the module uses the 288-pin DDR4 DIMM form factor that matches standard desktop memory slots.
Align the notch with the slot key, press down firmly until both side clips click into place, and verify the module sits level; the step often missed is confirming both clips have fully engaged.
No firmware updates are required for the memory itself; it is a passive component with a lifetime warranty, so replacement is only needed if a fault develops or capacity needs increase.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?