EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
Adds 8 GB of DDR4 2400 ECC registered memory with CL17 latency and 1.2 V operation for Micron-compatible servers
This is an 8 GB DDR4 2400 ECC registered DIMM built with major-brand chips and tested for server and workstation platforms. It runs at PC4-19200 speed with CL17 latency at 1.20 V and uses a 1Rx4 organisation on a 288-pin module.
Confirm that your system accepts DDR4 registered ECC memory and that the memory controller supports 2400 MHz operation at 1.20 V. Verify the motherboard or server manual for maximum capacity per slot and the total number of 288-pin DIMM slots available.
Suits administrators upgrading Micron MTA18ADF1G72PZ-2G3 or equivalent part numbers in compatible servers and workstations. Not for desktop boards that require unbuffered non-ECC memory or systems limited to lower DDR4 speeds.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The listing specifies one 8GB module (1x 8GB) in a 288-pin DIMM form factor; no additional modules, heat spreaders or cables are included.
This module is a single-rank 1Rx4 registered ECC DIMM running at 1.2V; choose it only if your platform requires registered ECC memory with that exact rank configuration.
The module operates at 2400 MT/s with CL17 latency at 1.2V; sustained throughput will vary with your memory controller, channel population and BIOS settings.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?