暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge contacts and black memory chips, no heat spreader

A-Tech

A-Tech 8GB DDR4 2400MHz CL17 Desktop RAM

SKU CH-Z8VQ-YGFY6

An 8 GB DDR4 desktop module running at 2400 MHz with CL17 latency and 1.20 V operation

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • Tested Frequency2400
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo
  • 8 GB capacity lets you run more apps at once
  • DDR4 2400 MHz speed moves data quickly for smoother multitasking
  • CL17 latency reduces wait cycles for snappier response
  • 20 V operation cuts power draw and heat
  • 288-pin DIMM fits standard desktop motherboard slots

8GB DDR4 2400MHz CL17 Desktop Module

This A-Tech module provides 8GB of DDR4 memory at 2400MHz with a CL17 latency rating. It is an unbuffered, non-ECC DIMM designed as a direct replacement for specific Corsair part numbers. The module operates at the standard DDR4 voltage of 1.20V and uses a 288-pin connector for desktop motherboards. It carries no heat spreader and is intended for general desktop memory upgrades.

Who This Suits and Who Should Look Elsewhere

This module suits owners of desktops that require DDR4 2400MHz SODIMM memory and specifically need to replace Corsair CMK32GX4M4A2400C16, CMK16GX4M2A2400C16 or CMK16GX4M2A2400C16R kits. It is not suitable for laptops or small form factor systems that require 262-pin SODIMM modules. Buyers needing ECC, registered memory, lower latency CL16 or speeds above 2400MHz should select a different part.

The Deciding Specification

The critical specification is the 288-pin DIMM form factor combined with DDR4 2400MHz speed and CL17 timing. Your motherboard must support DDR4 unbuffered non-ECC memory at this frequency and accept 288-pin modules. Verify your system documentation for maximum supported capacity per slot and qualified vendor lists before purchase.

特長

  • 8 GB capacity lets you run more apps at once
  • DDR4 2400 MHz speed moves data quickly for smoother multitasking
  • CL17 latency reduces wait cycles for snappier response
  • 20 V operation cuts power draw and heat
  • 288-pin DIMM fits standard desktop motherboard slots

仕様

BrandA-Tech
SeriesCompatible Replacement for Corsair
ModelCMK32GX4M4A2400C16, CMK16GX4M2A2400C16, CMK16GX4M2A2400C16R
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
Tested Frequency2400
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesCMK32GX4M4A2400C16, CMK16GX4M2A2400C16, CMK16GX4M2A2400C16R
Recommend UseCompatible Replacement for Corsair CMK32GX4M4A2400C16, CMK16GX4M2A2400C16, CMK16GX4M2A2400C16R

この商品に関する質問

Will the CL17 CAS latency become the bottleneck during long rendering sessions?

The module runs at CL17, so latency stays fixed at that value regardless of workload length.

How much heat does an 8 GB stick without a spreader produce at 1.20 V all day?

At standard 1.20 V DDR4 voltage and no heat spreader, the module relies on case airflow; it runs cool enough for typical desktop use.

Does my motherboard need a 288-pin DDR4 slot to accept this DIMM?

Yes, it is a 288-pin DDR4 UDIMM and requires a matching DDR4 DIMM socket.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。