暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR4 2666 ECC UDIMM 2Rx8 CL19 1.2V 288-Pin Server RAM

SKU CH-T6T8-6SJCH

8 GB DDR4 ECC UDIMM running at 2666 MHz with CL19 latency and 1.2 V operation for servers and workstations

  • CAS LatencyCL19
  • Rank2Rx8
  • ECC protection guards data integrity in servers
  • 2666 MHz DDR4 speed handles heavy workloads
  • Dual-rank 2Rx8 layout increases memory density
  • 2 V operation keeps power draw low
  • 288-pin UDIMM fits standard server slots

Server DDR4 ECC module

This 8 GB DDR4 ECC UDIMM is built for servers and workstations that require error-correcting unbuffered memory. The dual-rank 2Rx8 organisation helps maximise density on platforms with limited DIMM slots. It is not compatible with standard desktop or laptop systems.

Thermals and power

Operating at the standard DDR4 voltage of 1.2 V, the module runs within normal server thermal envelopes without active cooling. Passive airflow across the DIMM is sufficient for typical workloads. No additional power connectors or fan headers are required.

Build and connectors

The 288-pin DIMM uses gold-edge contacts and a standard key notch for DDR4 ECC unbuffered slots. Dual-rank x8 layout may affect maximum supported ranks per channel on some platforms. Verify your system's qualified-vendor list and channel population rules before installation.

特長

  • ECC protection guards data integrity in servers
  • 2666 MHz DDR4 speed handles heavy workloads
  • Dual-rank 2Rx8 layout increases memory density
  • 2 V operation keeps power draw low
  • 288-pin UDIMM fits standard server slots

仕様

CAS LatencyCL19
Rank2Rx8

この商品に関する質問

How do I install this 288-pin DDR4 ECC UDIMM and what step do people often miss?

Power down the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that ECC is enabled and the module runs at 2666 MHz.

What maintenance or replacement will this 1.2 V dual-rank module need later?

No routine maintenance is required; keep air pathways clear so the 1.2 V DDR4 module stays cool, and replace only if memory diagnostics report correctable ECC errors that exceed the platform threshold.

What limit appears first on this CL19 2666 MHz ECC UDIMM under sustained load?

The DDR4-2666 bus and CL19 latency set the throughput ceiling, while the 1.2 V dual-rank design caps thermal headroom before voltage or timing limits are reached.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。