EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
8GB DDR4 2666MHz desktop module with CL19 timing and 1.2V operation for AMD and Intel systems
This A-Tech module delivers 8GB of DDR4 memory at 2666MHz with CL19 latency and 1.20V operation. It uses a 288-pin DIMM form factor with 1Rx8 organisation and non-ECC unbuffered design. Major brand chips provide reliable performance for desktop systems.
Ideal for users replacing Kingston modules such as KVR26N19S8L/8 or HX426C16FB3/8 where DDR4 2666MHz CL19 is specified. Not suitable for laptops requiring SO-DIMM, servers needing ECC registered memory, or platforms limited to lower DDR4 speeds.
Align the notch with the 288-pin slot and press firmly until the retention clips engage. Most issues arise from mixing modules with different speeds or latencies, so verify your motherboard supports DDR4 2666MHz CL19 before purchasing.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2666 (PC4 21300) |
| Tested Frequency | 2666 |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Yes, this is a DDR4 288-pin DIMM and requires a motherboard with a DDR4 memory slot.
It will work, but the system will run all modules at the slower CL19 timing and 2666MHz speed.
Check the memory tab in CPU-Z or your BIOS; it should show 2666MHz frequency and 19-19-19 timings.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?