OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
A-Tech
8GB DDR4 2666MHz desktop DIMM running at 1.2V with 288 pins for AMD and Intel systems
This 8GB DDR4 DIMM runs at 2666MHz and is built for desktop systems. It suits owners who want a straightforward capacity increase without moving to higher speeds or server-class parts. The single module leaves other slots free for future expansion if the board supports it.
The module uses the standard 288-pin DDR4 form factor and operates at 1.2V. It is unbuffered and non-ECC, so it fits consumer desktop boards that accept regular UDIMMs. The pin layout matches the Micron MTA8ATF1G64AZ series it replaces, making physical installation direct.
The tested frequency is 2666MHz with a PC4-21300 data rate. This speed decides whether the module matches the motherboard's supported memory specification. Systems that require a different DDR4 speed or that only accept registered ECC memory will not work with this part.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2666 (PC4 21300) |
| Tested Frequency | 2666 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Yes, the module is rated for 2666 MT/s and the PC4-21300 designation confirms that maximum transfer rate.
It fits a standard DDR4 DIMM socket with 288 pins; the notch position matches the DDR4 keying.
Align the notch, press firmly until both retention clips click, and do not force the module in backwards — the offset notch prevents reverse insertion.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?