暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR4 DIMM with black chips and gold contacts

A-Tech

A-Tech 8GB DDR4 2933 ECC RDIMM 1Rx8 CL21 1.2V Server Memory

SKU CH-GF8K-86B6N

An 8 GB DDR4 2933 ECC registered DIMM with CL21 timing and 1.2 V operation, built as a compatible replacement for HP part numbers L15415-501 and L58119-001

  • Capacity8GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB DDR4 2933MHz RDIMM expands server capacity
  • ECC registered design protects data integrity
  • CL21 latency at 1.2V balances speed and efficiency
  • 1Rx8 single-rank layout simplifies memory configuration
  • Validated replacement for HP L15415-501 and L58119-001

8GB DDR4 2933 ECC RDIMM

This A-Tech module is an 8GB DDR4 2933 ECC Registered DIMM built for server and workstation platforms. It delivers 2933 MHz speed with CL21 latency at the standard 1.2V operating voltage. The single-rank 1Rx8 organisation uses major-brand chips and targets HP part numbers L15415-501 and L58119-001. Buyers who need non-ECC memory or consumer UDIMM form factors cannot use this product.

Registered DIMM for 288-pin DDR4 slots

The module plugs into a standard 288-pin DDR4 DIMM socket and requires a platform that supports Registered ECC memory. Error-correction and register buffering reduce electrical load on the memory controller, freeing capacity headroom for large multi-module configurations. Systems limited to unbuffered UDIMMs or those without ECC support in the BIOS will not accept this module.

Replaces HP L15415-501 and L58119-001

This kit serves as a direct replacement for the listed HP part numbers, restoring or expanding memory capacity in compatible servers. The upgrade is worthwhile when the system reports correctable ECC errors, shows memory bottlenecks under virtualised workloads, or simply needs more installed RAM to run additional virtual machines.

特長

  • 8GB DDR4 2933MHz RDIMM expands server capacity
  • ECC registered design protects data integrity
  • CL21 latency at 1.2V balances speed and efficiency
  • 1Rx8 single-rank layout simplifies memory configuration
  • Validated replacement for HP L15415-501 and L58119-001

仕様

BrandA-Tech
SeriesCompatible Replacement for HP
ModelL15415-501, L58119-001
Capacity8GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesL15415-501, L58119-001

この商品に関する質問

What is the first limit under sustained use with the 2933 MHz DDR4 RDIMM?

The registered buffer and ECC logic maintain signal integrity at full 2933 MHz speed, so the primary limit is the 8 GB capacity per module rather than a thermal or timing ceiling.

How much heat or noise does the 1.2 V registered ECC module produce during all-day operation?

At 1.2 V the module runs cool with no moving parts, so it adds negligible heat and zero audible noise to a server chassis running continuously.

What must the system already have for this 288-pin DDR4 RDIMM to work?

The motherboard must provide DDR4 RDIMM slots that support ECC registered memory and a memory controller able to address 1Rx8 modules at 2933 MHz.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。