暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech Supermicro Certified 16GB DDR3 1866MHz ECC RDIMM 2Rx4 Server Memory

SKU CH-9YBV-9JAP0

16 GB DDR3 ECC registered DIMM running at 1866 MHz with CL13 latency and 1.5 V operation

  • Capacity16GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for validated server compatibility
  • 16GB DDR3 1866MHz capacity handles demanding workloads
  • ECC registered design protects data integrity
  • Micron chipset ensures reliable component quality
  • CL13 latency at 1.5V standard voltage

Supermicro Certified 16GB DDR3 RDIMM

This module is a 16GB DDR3 1866MHz ECC registered DIMM certified for Supermicro systems. It targets administrators upgrading or repairing compatible servers that require registered memory with error correction. The Micron chipset and dual-rank 2Rx4 organisation suit workloads needing data integrity and capacity per slot.

Installation notes for 240-pin registered modules

Installation follows standard 240-pin RDIMM procedure: power down, open the chassis, align the notch, and press firmly until the latches click. Registered modules add a clock cycle, so the memory controller must support registered DIMMs; unbuffered-only boards will not post. Mixing registered and unbuffered DIMMs prevents boot, and populating slots in the wrong order can disable channels.

Verify platform compatibility before ordering

Confirm the server or workstation supports DDR3 1866MHz registered ECC RDIMMs at 1.5V and accepts 2Rx4 dual-rank modules. Check the vendor qualified-vendor list for part number MEM-DR316L-CL01-ER18 or Micron MT36JSF2G72PZ-1G9E1. Systems limited to unbuffered memory, lower speeds, or single-rank-only configurations cannot use this module.

特長

  • Supermicro certified for validated server compatibility
  • 16GB DDR3 1866MHz capacity handles demanding workloads
  • ECC registered design protects data integrity
  • Micron chipset ensures reliable component quality
  • CL13 latency at 1.5V standard voltage

仕様

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR316L-CL01-ER18
Capacity16GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
FeaturesSupermicro Certified MEM-DR316L-CL01-ER18 (MT36JSF2G72PZ-1G9E1)

この商品に関する質問

How can I confirm the 16GB DDR3 1866MHz module is running at PC3-14900 speed after installation?

Check the BIOS or UEFI memory information screen; it should report 1866 MT/s and CL13 latency for the installed DIMM.

What is included with the Supermicro Certified MEM-DR316L-CL01-ER18 module and what must I source separately?

The box contains one 16GB 2Rx4 RDIMM; any additional DIMMs for multi-channel population must be purchased separately.

Which capacity and rank option should I choose for a Supermicro server needing registered ECC DDR3?

This specific part is a single 16GB 2Rx4 registered ECC module; select it when your board requires that exact density and rank configuration.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。