暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small green circuit board with USB port and 11 trigger pins

Adafruit

Adafruit Audio FX Sound Board WAV/OGG Trigger 16MB Flash 11 Triggers

SKU CH-W62G-PATJT

Standalone sound board stores 16 MB of WAV or OGG files and plays them through 11 trigger inputs without a microcontroller

  • TypeEngineering Development Tools
  • Stand-alone audio triggering with no microcontroller needed
  • 11 trigger inputs for buttons or switches
  • 16 MB flash storage with USB drag-and-drop loading
  • High-quality decoding handles any sample rate or stereo format
  • Runs from a 3 to 5.5 VDC battery for portable projects

Compact Stand-Alone Audio Trigger

The Adafruit Audio FX Sound Board adds sound effects to props, costumes and toys without any microcontroller or programming. It stores WAV or OGG files on 16 MB of flash and plays them through a stereo line output. Power comes from a 3 to 5.5 VDC battery, so the board runs completely on its own.

For Makers Who Need Simple Button-Activated Sound

This board suits builders who want up to 11 trigger inputs for buttons or switches and five trigger modes without writing code. It is not for projects that require more storage than 16 MB, polyphonic playback, or advanced audio processing such as mixing or DSP effects.

USB Mass Storage and Flexible Trigger Modes

The built-in USB mass storage lets you drag and drop audio files directly from a computer. Five selectable trigger types change how each button behaves, covering momentary, latching, sequential and random playback styles for varied interactive designs.

特長

  • Stand-alone audio triggering with no microcontroller needed
  • 11 trigger inputs for buttons or switches
  • 16 MB flash storage with USB drag-and-drop loading
  • High-quality decoding handles any sample rate or stereo format
  • Runs from a 3 to 5.5 VDC battery for portable projects

仕様

TypeEngineering Development Tools

この商品に関する質問

What power source must I supply to run the board?

Provide any 3 to 5.5 VDC battery or regulated supply; the board has no on-board regulator and draws power directly from the connected source.

Can I keep my existing momentary buttons and use them with the 11 trigger inputs?

Yes, each of the 11 trigger pins accepts a simple switch-to-ground connection, so your current buttons work without modification.

How do I verify the board plays the correct files after I drag them onto the 16 MB flash?

Press each wired button in turn; the corresponding audio file should play immediately through the stereo line-out or headphones.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。