BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
AFRNDK
A 2U server power supply delivering 1600 W rated output at 12 V and 133 A with 93 % efficiency across 100–264 VAC input
This 2U server power supply delivers a rated 1600W at 12V with 133A output current. It accepts a full input range of 100-264VAC at 50-60Hz and operates at 93% efficiency. The unit weighs 2.3kg and is rated for a working temperature range of 0-45°C.
Designed for miners using Antminer S9J, S9i, Z11, Z11J, Z15 or Innosilicon A10 Pro units that require a 12V 1600W source with 6-pin connectors. Builders needing redundant hot-swap modules, 80 Plus certification, or support for GPU rigs with PCIe power cables should look at other form factors.
The decisive spec is the 1600W rated power on a single 12V rail delivering 133A. If your chassis and miner boards draw within this 12V limit and fit a 2U bay, the unit matches; if the build requires multiple voltage rails or higher per-rail current, it will not suffice.
この商品の仕様はまだ公開されていません。
It runs on 100-264VAC at 50-60Hz, covering standard mains voltages worldwide.
Yes, the supply is listed as compatible with Antminer S9J, Z15, Z11, Z11J and Innosilicon A10 Pro units.
Measure the 12V rail under load; it should maintain 12V at up to 133A with the fan spinning and no error lights.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?