暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular silver crypto miner with front vents and rear exhaust ports

AFRNDK

AFRNDK Fluminer L1 Scrypt Miner 5.3G 1200W 45dB

SKU CH-D6P2-XTSW0

Scrypt miner delivering 5.3 GH/s at 1200 W with 45 dB noise for Dogecoin and Litecoin

  • TypeMining Machine/Miner
  • Crypto AlgorithmScrypt
  • Compatible CurrencyDogecoin (DOGE)
  • Mining HardwareAISC
  • Hashrate5300MH/S
  • Noise level45dB
  • 3 GH/s ±5 % hashrate for Dogecoin and Litecoin mining
  • 1200 W ±10 % power draw keeps electricity costs predictable
  • 45 dB operating noise suits home or office spaces
  • 110–240 V input works on standard mains worldwide
  • Scrypt ASIC hardware targets DOGE, LTC, BEL and similar coins

Home Scrypt Miner

The AFRNDK Fluminer L1 is a Scrypt algorithm miner built for home use. It delivers a 5.3 GH/s hashrate at 1200 W power draw and runs at 45 dB. The unit operates on 110-240 V mains input without extra wiring.

Buyer Fit

This miner suits users who want Dogecoin or Litecoin income with lower noise than typical industrial units. Buyers needing higher density or multi-algorithm support should evaluate other Scrypt hardware.

Included Extras

The box contains the miner and standard power cables for immediate 110-240 V operation. No extra controllers or software licences are bundled, so pool configuration is handled through the device web interface.

特長

  • 3 GH/s ±5 % hashrate for Dogecoin and Litecoin mining
  • 1200 W ±10 % power draw keeps electricity costs predictable
  • 45 dB operating noise suits home or office spaces
  • 110–240 V input works on standard mains worldwide
  • Scrypt ASIC hardware targets DOGE, LTC, BEL and similar coins

仕様

BrandFluminer L1
SeriesL1
ModelL1
TypeMining Machine/Miner
Crypto AlgorithmScrypt
Compatible CurrencyDogecoin (DOGE)
Mining HardwareAISC
Hashrate5300MH/S
Noise level45dB
Power Consumption1200W

この商品に関する質問

Does the AFRNDK Fluminer L1 need a 110‑240 V power source and a network link to start mining?

Yes. The unit runs on 110‑240 V mains and connects via Ethernet to a mining pool before it can begin hashing at 5.3 Gh/s.

Will the 45 dB noise level let the Fluminer L1 share a room with older ASICs that run louder?

At 45 dB the Fluminer L1 is quieter than many legacy Scrypt miners, so it can sit alongside older hardware without raising the overall noise floor.

How can I confirm the miner is delivering its rated 5.3 Gh/s after setup?

Check the pool dashboard or the miner’s web interface; a steady reported hashrate near 5 300 MH/s with 1 200 W draw shows the L1 is operating as specified.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。