暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

AFRNDK

AFRNDK Innosilicon T2T 32T SHA256 ASIC miner 2200W double tube

SKU CH-611F-WHTX6

SHA-256 ASIC miner delivering 32 Th/s at 2200 W with dual 12038 fans for 72 dB operation

  • High hash rate of 32 Th/s for SHA-256 mining
  • Power draw of 2200 W keeps running cost predictable
  • Dual 12038 fans with PWM control cool chips efficiently
  • Aluminium chassis aids heat removal and structural rigidity
  • Operates on 220-240 V supply for stable high-power delivery

What this miner does

The AFRNDK Innosilicon T2T delivers a SHA-256 hashrate of 32Th/s at a wall draw of 2200W. An integrated power supply and aluminium chassis keep the footprint compact for operators who want a single-box Bitcoin or Bitcoin Cash machine.

Who this suits and who it does not

The unit runs on 220V-240V mains only, so sites without that voltage range cannot operate it. The 72dB noise level and 7.5kg weight also rule out quiet office or residential rack spaces. Buyers needing lower power draw or silent operation should look at something else.

The spec that decides fit

Double-tube cooling with two 12038 PWM fans moves air across the chips at 4.5A each, keeping thermals in check at the rated 2200W. If your facility cannot supply the required voltage or tolerate the acoustic output, this miner will not work for you.

特長

  • High hash rate of 32 Th/s for SHA-256 mining
  • Power draw of 2200 W keeps running cost predictable
  • Dual 12038 fans with PWM control cool chips efficiently
  • Aluminium chassis aids heat removal and structural rigidity
  • Operates on 220-240 V supply for stable high-power delivery

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What is the sustained hash-rate limit of this ASIC miner?

The Innosilicon T2T delivers a steady 32Th/s on the SHA-256 algorithm while drawing 2200W from the wall.

How loud and hot does the unit run during continuous operation?

Two 12038 PWM fans rated at 4.5A keep chip temperatures in check and produce 72dB of noise within a 5-95%RH humidity range.

What voltage supply must already be in place before this miner will start?

A 220-240V circuit capable of at least 1800W is required; the integrated PSU will not operate on lower voltages.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。