暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two black stainless steel brackets with oblong mounting holes for 120 and 140mm fan spacing

Alphacool

Alphacool 120/140mm Mounting Bracket for Eisbecher 2 pcs

SKU CH-VK37-3R1HK

Mounts Alphacool Eisbecher reservoirs to 120 or 140 mm radiator fan sites using stainless-steel brackets secured with two screws each

  • TypeReservoir
  • Mount Eisbecher reservoirs on 120mm or 140mm radiator fan mounts
  • Stainless-steel galvanised brackets resist corrosion for long-term reliability
  • Two-piece kit lets you secure one reservoir in either fan spacing
  • Simple two-screw swap replaces the original Eisbecher bracket in minutes
  • Black finish blends with standard radiator aesthetics for a clean look

Mounting Bracket for Alphacool Eisbecher

This mounting bracket lets you attach any Alphacool Eisbecher reservoir to standard radiators that use 120 or 140mm fan spacing. It is designed for custom-loop builders who want flexible reservoir placement inside their case. The kit includes two brackets made from galvanised stainless steel with a black finish. Each bracket replaces the original Eisbecher mounting hardware.

Radiator Compatibility Limits

The brackets fit radiators with standard 120mm and 140mm fan mounting holes using inner and outer oblong slots respectively. They do not adapt to radiators with non-standard hole spacing or larger fan sizes. Builders must verify their radiator uses the common 120mm or 140mm pattern before purchasing. No other mounting standards are supported by this hardware.

Simple Swap Installation

Installation requires removing the existing Eisbecher bracket and securing the new one with two small screws per side. The oblong holes provide lateral adjustment to align with radiator holes. The main difficulty is reaching the screws in tight spaces between the radiator and case wall. Ensure sufficient clearance for a screwdriver before starting the swap.

特長

  • Mount Eisbecher reservoirs on 120mm or 140mm radiator fan mounts
  • Stainless-steel galvanised brackets resist corrosion for long-term reliability
  • Two-piece kit lets you secure one reservoir in either fan spacing
  • Simple two-screw swap replaces the original Eisbecher bracket in minutes
  • Black finish blends with standard radiator aesthetics for a clean look

仕様

TypeReservoir

この商品に関する質問

Which bracket set should I choose for 120 mm versus 140 mm fan mounts?

The kit includes two brackets; inner oblong holes fit 120 mm fan sites, outer holes fit 140 mm fan sites, so one set covers both standards.

How does the bracket affect reservoir placement inside a case?

It lets you mount any Alphacool Eisbecher reservoir directly onto a standard radiator, saving space and keeping airflow clear — for example, radiator at the front with fans blowing in, reservoir on the back.

What mounting standard does the bracket use and what does it limit?

The stainless-steel brackets bolt to 120 mm or 140 mm fan hole patterns with two screws each, so installation is limited to radiators or case panels that follow those spacings.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。