暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Clear flexible PVC tubing 8 mm inner 10 mm outer diameter 3 metre roll

Alphacool

Alphacool 17491 AlphaTube HF Tubing 8mm ID 10mm OD 3m liquid cooler

SKU CH-K2X6-FW63G MPN 17491

Clear PVC tubing connects liquid-cooling components with 8 mm inner and 10 mm outer diameter over a 3 m length

  • TypeTubing
  • ColorClear
  • FeaturesThe AlphaTube HF tubing has the perfect flexibility to be ea
  • Easy routing with kink resistance
  • 8 mm inner diameter for standard fittings
  • 3 metre length covers most loop layouts
  • PVC material rated from -10 °C to 80 °C
  • 8 bar burst pressure for high-pressure safety

Alphacool AlphaTube HF 8mm ID Tubing

This clear PVC tubing carries coolant between water-blocks, radiators, pumps and reservoirs in a custom liquid-cooling loop. The 3-metre length suits most single-loop builds and leaves enough slack for tidy routing. Builders who prefer soft tubing over rigid acrylic or PETG will appreciate the forgiving handling. Buyers who need coloured or UV-reactive hose should look at other AlphaTube variants.

65-70 A-Shore hardness resists kinking

The tubing balances flexibility with enough rigidity to hold shape around tight bends without collapsing. Rated for continuous use from minus ten to eighty degrees Celsius, it stays pliable under normal loop temperatures. Working pressure is two bar with an eight-bar burst margin, so standard pump pressures remain well within limits. No acoustic or power-draw figures apply to passive tubing.

Clear PVC with 10mm outer diameter

The material accepts standard 10mm OD compression fittings and push-fit connectors for quick assembly. Three metres lets you cut exact runs and still have spare for future rearrangements. The smooth bore reduces flow restriction and simplifies flushing during maintenance. Loops that demand hard-tube aesthetics or smaller bend radii are not addressed by this product.

特長

  • Easy routing with kink resistance
  • 8 mm inner diameter for standard fittings
  • 3 metre length covers most loop layouts
  • PVC material rated from -10 °C to 80 °C
  • 8 bar burst pressure for high-pressure safety

仕様

BrandAlphacool
Model1019544
TypeTubing
ColorClear
FeaturesThe AlphaTube HF tubing has the perfect flexibility to be easily installed. It is flexible enough to be laid without effort, but at the same time rigid enough that it will not kink easily, even with tighter bending radii.

この商品に関する質問

How do I install the 8 mm ID tubing without kinking it?

Push the tubing over barbed fittings; its 65-70 A-Shore hardness gives enough rigidity to resist kinks on tight bends while staying flexible enough to route by hand.

When should I replace the PVC tubing in my loop?

Plan on swapping the tube after several years or if it clouds, stiffens, or shows surface cracks from plasticiser loss.

What pressure limit will I hit first during a long stress test?

The working pressure is rated at 2 bar, well below the 8 bar burst rating, so sustained pump pressure will reach the working limit first.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。