暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 45-degree revolvable compression fitting with G1/4 thread for 10/13 mm tubing

Alphacool

Alphacool 3/8"ID 1/2"OD 45° Revolvable Compression Fitting G1/4 Black 17072

SKU CH-YH2P-XZC15

A 45-degree revolvable compression fitting with 10 mm inner and 13 mm outer diameter for G1/4 liquid-cooling loops

  • TypeFittings
  • High-flow 10 mm inner diameter for unrestricted coolant movement
  • 45° revolvable elbow simplifies tight routing in custom loops
  • G1/4 thread fits standard water-cooling components
  • Deep Black chromatised finish resists peeling and stays vivid
  • Compression design seals 13 mm OD tubing without extra clamps

Fitting for 10 mm ID tubing

This 45° revolvable compression fitting accepts tubing with a 10 mm inner diameter and 13 mm outer diameter. It threads into any G1/4 port and the rotating elbow lets you align the tube run without stress on the connection. The deep black finish is bonded to the brass body for lasting colour. One fitting is included in the package.

Suits custom loops with angled routing

Builders who need a tidy 45° turn in a tight space will appreciate the revolvable design. It is not for systems that require straight inline connections or a different bend angle. The single G1/4 thread also means it cannot join two tubes directly without a port.

10 mm inner diameter decides fit

The fitting only seals correctly with tubing that has a 10 mm inner diameter and 13 mm outer diameter. Using any other tube size will leak or damage the compression ring. Verify your tubing dimensions before ordering.

特長

  • High-flow 10 mm inner diameter for unrestricted coolant movement
  • 45° revolvable elbow simplifies tight routing in custom loops
  • G1/4 thread fits standard water-cooling components
  • Deep Black chromatised finish resists peeling and stays vivid
  • Compression design seals 13 mm OD tubing without extra clamps

仕様

TypeFittings

この商品に関する質問

How can I verify the fitting is seated correctly after installation?

Check that the G1/4 thread is fully tightened and the compression ring grips the 13/10 tubing without any coolant escaping when the loop is pressurised.

What comes in the package and do I need extra parts for a complete connection?

The box contains one Deep Black 45° revolvable compression fitting for 13/10 tubing; you must supply the tubing and any additional fittings your loop requires.

Which colour variant should I choose to match a black-themed build?

Select the Deep Black version listed as 17072; Chrome and Shiny Copper are the other two finishes available in this series.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。