暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black addressable RGB ring for 13 mm rigid tubing, 22 mm outer diameter, 20 mm long, 75 cm cable

Alphacool

Alphacool Aurora HardTube LED Ring 13mm Deep Black 15365

SKU CH-8YD6-R6FYT

An addressable RGB ring illuminates 13 mm rigid tubing with daisy-chainable 3-pin connectors and a 75 cm cable

  • LED ColorARGB
  • Addressable RGB lighting for 13 mm rigid tubing
  • 20 mm ring length fits standard hard-tube segments
  • 22 mm outer diameter matches common fittings
  • 75 cm cable with integrated Y-adapter enables daisy-chaining
  • Simple slide-on installation with internal O-rings prevents tube scratches

Alphacool Aurora HardTube LED Ring 13mm

The Alphacool Aurora HardTube LED Ring is an addressable RGB illumination accessory for rigid tubing with a 13 mm inside diameter. It fits water-cooling builders who want to light the tubing runs themselves rather than only blocks and reservoirs. The Deep Black finish suits dark-themed loops. Part number 15365 identifies this specific ring.

Easy Installation

The ring slides over the HardTube or hose and is held by two internal O-rings that also protect the tube surface from scratches. Connection uses a standard 3-pin addressable RGB header compatible with any digital RGB controller. A built-in Y-adapter on the 75 cm cable allows daisy-chaining multiple rings for tidy cable routing. No tools are required for mounting.

13 mm ID Lighting Capacity

Each ring spans 20 mm in length with a 22 mm outside diameter, adding a discrete illuminated segment to a 13 mm tube. Addressable LEDs enable individual LED control for effects such as colour cycles, strobe, pulse and wave patterns. The ring only illuminates the installed tube section; builders needing continuous light along longer runs must add further rings. It does not replace block or reservoir lighting.

特長

  • Addressable RGB lighting for 13 mm rigid tubing
  • 20 mm ring length fits standard hard-tube segments
  • 22 mm outer diameter matches common fittings
  • 75 cm cable with integrated Y-adapter enables daisy-chaining
  • Simple slide-on installation with internal O-rings prevents tube scratches

仕様

LED ColorARGB

この商品に関する質問

How do I verify the Aurora HardTube LED Ring 15365 is working after sliding it onto my 13 mm hard tube?

Connect the 3-pin ARGB cable to a compatible controller or motherboard header, power on the system, and confirm each LED lights individually through the control software.

What comes in the box with the Aurora HardTube LED Ring 15365 and what must I purchase separately?

The ring includes two internal O-rings for secure mounting and an integrated Y-adapter for daisy-chaining; a 3-pin addressable RGB controller or motherboard header is required separately.

Which Aurora HardTube LED Ring version should I choose for 13 mm inner diameter tubing?

Select the 13 mm inner diameter model (22 mm outer diameter, 20 mm ring length, 75 cm cable) to match your hard tube size exactly.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。