暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black knurled compression fitting for 14mm hard tubing, G1/4 thread

Alphacool

Alphacool Eiszapfen 14mm HardTube Compression Fitting G1/4 Knurled Deep Black 1019796

SKU CH-ASN8-GT5HQ

G1/4 compression fitting for 14 mm hard tubing with a triple O-ring seal and durable chromated black finish

  • ColorBlack
  • FeaturesThe Alphacool Eiszapfen HardTube fittings are among the most
  • Triple O-ring seal secures 14 mm hard-tube connections
  • Chromated brass finish resists wear and external influences
  • Laser-etched logo stays visible without fading or peeling
  • G1/4 thread fits standard water-cooling components
  • Knurled union nut allows tool-free tightening and removal

Alphacool Eiszapfen 14mm HardTube Fitting

This Alphacool Eiszapfen compression fitting connects 14mm outer-diameter hard tubing to any component with a G1/4 thread. It suits custom-loop builders who want a secure, leak-free joint finished in Deep Black. The knurled union nut allows firm hand-tightening without tools. The fitting is sold individually as part number 1019796.

Triple O-ring sealing system

The decisive specification is the triple O-ring seal that locks the tube inside the fitting. Two rings sit inside the body while a third compresses under the union nut, creating a redundant barrier and increasing tube retention force. This design targets builders who prioritise long-term reliability over quick-disconnect convenience. No other sealing method is used on this model.

Hand-tight installation with deburred tube

Assembly requires removing the union nut and inner O-ring, threading the body into the G1/4 port, then inserting a cleanly deburred hard tube before tightening the nut by hand. The most common error is skipping the deburring step, which can damage an O-ring and cause a slow leak. The laser-etched logo resists wear during repeated disassembly.

特長

  • Triple O-ring seal secures 14 mm hard-tube connections
  • Chromated brass finish resists wear and external influences
  • Laser-etched logo stays visible without fading or peeling
  • G1/4 thread fits standard water-cooling components
  • Knurled union nut allows tool-free tightening and removal

仕様

BrandAlphacool
Model1019796
Part Number1019796
ColorBlack
FeaturesThe Alphacool Eiszapfen HardTube fittings are among the most popular HardTube water cooling fittings on the market. They are characterized by their high processing quality and the triple sealing system.

この商品に関する質問

Will the 14 mm hard tube sit flush and seal reliably once the fitting is tightened in a loop?

The triple sealing system uses two internal O-rings plus a third that compresses against the tube when the union nut is tightened, giving a secure seal and strong pull-out resistance.

What thread standard does the G1/4 connection follow, and which components will it screw into?

It uses the standard G1/4 inch parallel thread found on most water-blocks, radiators, reservoirs and pumps, so it fits any component with that port.

How much clearance does the knurled union nut need to tighten by hand around the 14 mm tube?

The knurled nut is designed for finger tightening on 14 mm OD hard tube; allow enough space around the port for a comfortable grip to compress the O-ring fully.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。