暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 20mm G1/4 male-female extender fitting with matte finish

Alphacool

Alphacool Eiszapfen G1/4" Male-Female Extender 20mm Black 17256

SKU CH-ZAPK-GA0S7

A 20 mm G1/4″ male-to-female extender that adds 10 mm of reach for tight liquid-cooling loops

  • TypeFittings
  • Extends G1/4" thread by 20mm for hard-to-reach ports
  • High-flow design maintains coolant circulation without restriction
  • Durable coating process resists chipping and peeling over time
  • Includes three coloured O-rings for customisable accent options
  • Precision machining ensures leak-free seal in custom loops

G1/4" Male-Female Extender for Custom Loops

This Alphacool Eiszapfen fitting extends a G1/4" thread by 20 mm to bridge gaps between components in a custom water-cooling loop. The black finish resists chipping and matches other parts in the series. It is aimed at builders who need a little extra reach when routing rigid or flexible tubing.

Thread depth limits how far the extender can bridge

The 20 mm length adds a fixed offset; it cannot be shortened or lengthened once installed. If the recessed port is deeper than the extender provides, the connection will still not seat fully. Builders with very deep or unusually spaced ports may need a different length that this part does not supply.

20 mm fixed extension length decides fit

This single measurement determines whether the adapter solves the clearance problem or leaves the thread too short. Check the exact recess depth of your block, radiator or reservoir before ordering; no other dimension in the specification compensates for a mismatch.

特長

  • Extends G1/4" thread by 20mm for hard-to-reach ports
  • High-flow design maintains coolant circulation without restriction
  • Durable coating process resists chipping and peeling over time
  • Includes three coloured O-rings for customisable accent options
  • Precision machining ensures leak-free seal in custom loops

仕様

TypeFittings

この商品に関する質問

Should I pick the 20 mm extender or a shorter one?

Choose the 20 mm extender when the G1/4" port sits far back or is hard to reach; the extra length clears obstructions without adding another fitting.

How much does the 20 mm length change the loop layout?

It adds 20 mm of straight reach to a G1/4" thread, moving the connection point outward so tubing can route cleanly around tight corners.

Does the G1/4" thread limit flow or pressure in a high-flow loop?

The G1/4" male-to-female thread is the standard water-cooling interface and does not restrict flow in typical custom loops.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。