暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small brass cylinder with red laser module and 4-pin Molex cable

Alphacool

Alphacool Eiszapfen Laser Fitting 4pin Molex 1016330

SKU CH-S69X-PG5J1

A brass laser alignment tool with G1/4″ thread and 4-pin Molex power for precise HardTube drilling in water-cooled PCs

  • ColorBlack
  • FeaturesAchieve maximum precision with your Alphacool Eiszapfen lase
  • Laser alignment ensures precise HardTube drilling
  • G1/4 thread fits standard water-cooling components
  • 4-pin Molex with ATX jumper enables standalone PSU power
  • Compact 17 x 24 mm brass body adds minimal bulk
  • Class 1M laser per DIN EN 60825-1 for safe operation

Laser alignment tool for hard-tube builds

The Alphacool Eiszapfen laser fitting helps builders align rigid tubing before drilling holes for bulkhead fittings in a custom water-cooling loop. It threads into any standard G1/4 port so the laser beam marks the exact centre point for each cut.

Brass body with 5.5 mm thread and 50 cm cable

The 17 mm diameter by 24 mm tall brass housing weighs 45 g and engages with a 5.5 mm thread depth. A 50 cm cable ending in a 4-pin Molex plug powers the Class 1M laser rated to DIN EN 60825-1, so the beam stays visible while you position the drill.

Requires ATX jumper and G1/4 ports

The package includes a 24-pin ATX jumper to run the laser from a PSU without a motherboard. You need available G1/4 threads on your components to mount the fitting; it does not supply tubing, fittings or a drill, so those must be sourced separately.

特長

  • Laser alignment ensures precise HardTube drilling
  • G1/4 thread fits standard water-cooling components
  • 4-pin Molex with ATX jumper enables standalone PSU power
  • Compact 17 x 24 mm brass body adds minimal bulk
  • Class 1M laser per DIN EN 60825-1 for safe operation

仕様

BrandAlphacool
Model1016330
Part Number1016330
ColorBlack
FeaturesAchieve maximum precision with your Alphacool Eiszapfen laser fitting. It allows you to perfectly align your HardTubes for when you need to drill holes for your bulkhead fittings in your water-cooled PC.

この商品に関する質問

Will the 5.5 mm thread length on the 1016330 fit the G1/4 ports on my existing radiator and pump?

Yes, the G1/4 thread is the standard water-cooling size and the 5.5 mm thread depth matches common radiators, pumps and reservoirs.

How do I confirm the laser is aligned correctly once I power the fitting with the 4-pin Molex connector?

Power the unit via the 4-pin Molex or the included 24-pin ATX jumper; the Class 1M laser projects a visible beam showing the exact drill centre.

Does the box contain the 24-pin ATX jumper plug and the 50 cm Molex cable, or must I buy them separately?

Both the 50 cm Molex cable and the 24-pin ATX jumper plug are included; no extra purchase is required.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。