暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Compact high-voltage DC-DC converter module with metal enclosure and terminal connections

Analog Technologies

Analog Technologies High Voltage Power Supply 24V 6kV 1mA AHV24V6KV1MAW

SKU CH-22N2-S6N8Z

Compact 24 V DC-to-DC module delivers adjustable 0–6 kV at up to 1 mA with electronic shutdown

  • TypeHigh Voltage Power Supply

Options AHV24V6KV1MAW

  • Adjustable 0–6 kV output controlled by 0–5 V signal
  • 24 V DC input draws only 80–380 mA
  • Precise 5 V reference voltage with ±0.05 V tolerance
  • Full-span modulation enables continuous voltage control
  • Electronic shutdown provides instant output disable

High-Voltage DC-DC Module

This compact power supply converts a 24 V DC input into an adjustable 0 to 6 kV output with a maximum current of 1 mA. It targets engineers building X-ray sources, electrospinning rigs, or semiconductor inspection tools that need a precise high-voltage rail. The module accepts a control voltage of 0 to 5 V for full-span output modulation.

Replaces Bulky HV Racks

The unit replaces rack-mount high-voltage supplies when space, weight, or integration time are constraints. A jump to this module makes sense when the application demands 6 kV at low current and can tolerate a 24 V input rail with current draw between 80 mA and 380 mA. It is not for systems needing higher current, bipolar output, or mains-powered operation.

PCB-Mount Integration

Four mounting holes and a pin header allow direct soldering to a host board, so no external wiring harness is required. The 5 V reference output (±0.05 V) simplifies control-loop design, while the electronic shutdown pin adds a hardware safety interlock. Designers must provide adequate creepage and clearance on the PCB layout to meet 6 kV isolation requirements.

特長

  • Adjustable 0–6 kV output controlled by 0–5 V signal
  • 24 V DC input draws only 80–380 mA
  • Precise 5 V reference voltage with ±0.05 V tolerance
  • Full-span modulation enables continuous voltage control
  • Electronic shutdown provides instant output disable

仕様

TypeHigh Voltage Power Supply

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What input voltage and current range does the AHV24V6KV1MAW require from the 24 V source?

The module operates from 24 V ± 1 V and draws between 80 mA and 380 mA depending on load.

How is the 0–6 kV output set, and what wiring mistake causes no output?

Apply a 0–5 V control signal to the CTRL pin; leaving CTRL floating or grounded keeps the output at 0 V.

Which onboard reference should be checked periodically to verify calibration stability?

The 5 V ± 0.05 V reference voltage; drift beyond this window indicates the module needs service.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。