暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Antec

Antec C6 Curve ARGB ATX Mid-Tower PC Case

SKU CH-5C6J-EQWBN MPN C6 Curve ARGB

Mid-tower ATX case with three-sided curved tempered glass, three pre-installed ARGB PWM fans, top 360 mm radiator support, 450 mm GPU clearance, USB Type-C 10 Gbps front port.

  • TypeATX Mid Tower
  • ColorBlack
  • Case MaterialSteel + Plastic + Glass
  • Motherboard CompatibilityATX / ITX / Micro ATX
  • Side Panel4mm Tempered Glass
  • LEDARGB

Option C6 Curve ARGB

  • Three-sided panoramic curved glass showcases every component
  • Three pre-installed ARGB PWM fans create vertical airflow
  • Supports 360 mm radiators and 450 mm GPUs for high-end builds
  • Back-connect motherboard design with flexible PSU mounting simplifies cable routing
  • USB Type-C 3.2 Gen 2 at 10 Gbps delivers fast front-panel connectivity

Three-Sided Curved Glass Design

The Antec C6 Curve ARGB is an ATX mid-tower case built with steel, plastic and 4mm tempered glass panels on three sides. It accepts ATX, Micro-ATX and ITX motherboards and comes in black. The panoramic layout gives full visibility of internal components while the integrated ARGB lighting adds visual flair for gaming or workstation builds.

Vertical Airflow With Pre-Installed ARGB Fans

The case ships with two 120mm reverse bottom intake fans and one 140mm rear exhaust fan, all PWM ARGB, creating a vertical airflow path. This replaces traditional front-to-back cooling and is worth the jump when building with high-wattage parts that benefit from direct GPU and CPU cooler exposure. Top mounts support up to 360mm radiators for liquid cooling upgrades.

USB Type-C 3.2 Gen 2 10Gbps Front Port

A single Type-C port on the front panel delivers 10Gbps bandwidth for fast external storage or peripherals. The interface is limited by the motherboard header it connects to, so actual throughput depends on the board’s USB 3.2 Gen 2 support. Two USB 3.0 ports and a combo audio jack round out the front I/O.

特長

  • Three-sided panoramic curved glass showcases every component
  • Three pre-installed ARGB PWM fans create vertical airflow
  • Supports 360 mm radiators and 450 mm GPUs for high-end builds
  • Back-connect motherboard design with flexible PSU mounting simplifies cable routing
  • USB Type-C 3.2 Gen 2 at 10 Gbps delivers fast front-panel connectivity

仕様

BrandAntec
ModelC6 Curve ARGB
TypeATX Mid Tower
ColorBlack
Case MaterialSteel + Plastic + Glass
Motherboard CompatibilityATX / ITX / Micro ATX
Side Panel4mm Tempered Glass
LEDARGB
Dust FiltersBottom / Front
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays1
Expansion Slots7
Front PortsPower, USB 3.0 x 2, Type-C 3.2 Gen 2 x 1(10Gbps), Headphone/Mic Combo Jack
Fan OptionsRear - 1 x 120mm / Rear - 1 x 140mm / Top - 2 x 140mm / Top - 3 x 120mm
Radiator OptionsRear - Up to 120mm / Top - Up to 120mm / Top - Up to 140mm / Top - Up to 240mm / Top - Up to 280mm / Top - Up to 360mm
Max GPU Length450 mm
Max CPU Cooler Height180 mm
Max PSU Length160 mm
Dimensions480 x 235 x 470mm(DWH)
Weight9.12kg
配送重量11.48 kg
梱包サイズ572 × 546 × 305 mm

このモデルの他のバージョン

同シリーズにさらに 2点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will a 450 mm graphics card fit without blocking the front fans?

The case supports GPUs up to 450 mm, and the two 120 mm reverse bottom intake fans sit behind the curved glass so a full-length card clears them.

Can I mount a 360 mm radiator on the top while keeping the rear 140 mm exhaust fan?

Yes, the top accepts radiators up to 360 mm and the rear 140 mm exhaust position remains separate.

Does the front Type-C port deliver 10 Gbps on a motherboard with only a USB 3.2 Gen 1 header?

The port is wired for USB 3.2 Gen 2 10 Gbps; it will run at 5 Gbps if connected to a Gen 1 header.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。