暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black mini-tower PC case with mesh front panel and tempered glass side panel

Antec

Antec NX200M RGB mini-tower PC case

SKU CH-XE4D-KVPXT

Mini-tower M-ATX case with mesh front, tempered-glass side panel and three fixed-mode 120mm RGB fans included

  • TypeATX Mid Tower

Options NX200M RGB

  • NX200M
  • NX200M RGB

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Large mesh front panel improves airflow into the case
  • Three included 120mm RGB fixed-mode fans add lighting and cooling
  • Tempered glass swing side panel shows internal components
  • Supports up to 240mm front radiator for liquid cooling
  • Front USB 3.0 port enables fast peripheral connection

Compact M-ATX chassis for space-constrained builds

The Antec NX200M RGB is a mini-tower case that accepts M-ATX and ITX motherboards. It measures 351 by 200 by 390 millimetres and weighs 3.84 kilograms. Three 120-millimetre RGB fixed-mode fans are included, two at the front and one at the rear. A tempered-glass side panel swings open for easy access.

Front-panel I/O and airflow limits

The front panel provides one USB 3.0 port, two USB 2.0 ports and combined audio jacks. Fan mounts allow two 120-millimetre or two 140-millimetre fans at the front, two 120-millimetre fans at the top and one 120-millimetre fan at the rear. Radiator support reaches 240 millimetres at the front and 120 millimetres at the rear. A bottom dust filter is fitted.

Replaces larger ATX towers when expansion is minimal

This case suits builders who need a smaller footprint and only four expansion slots. It holds two 3.5-inch drives plus one 2.5-inch drive, with an additional dedicated 2.5-inch bay. It is not for systems that require ATX motherboards, more than four slots, additional 3.5-inch bays or radiators larger than 240 millimetres.

特長

  • Large mesh front panel improves airflow into the case
  • Three included 120mm RGB fixed-mode fans add lighting and cooling
  • Tempered glass swing side panel shows internal components
  • Supports up to 240mm front radiator for liquid cooling
  • Front USB 3.0 port enables fast peripheral connection

仕様

TypeATX Mid Tower

この商品に関する質問

M-ATX or ITX — which motherboard fits this mini-tower?

Both M-ATX and ITX boards are supported, so choose the form factor that matches your planned build.

What does the 240 mm front radiator limit mean for liquid cooling?

You can mount a 240 mm AIO in the front; the top only takes 120 mm fans, so a thicker radiator will not fit there.

Does the USB 3.0 front port need a specific motherboard header?

Yes — it requires an internal USB 3.0 header; if your board only has USB 2.0 headers the port will fall back to 2.0 speeds.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。