暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
White 8 g syringe of carbon-based thermal paste with grey plunger and black cap

ARCTIC COOLING

ARCTIC COOLING MX-6 8 g Thermal Paste

SKU CH-7P85-1ZVNN

Carbon-based thermal compound with 20 % lower resistance than MX-4, non-conductive, suited for CPUs, GPUs and consoles

Weight 8g

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • 20% lower thermal resistance than MX-4 for better heat transfer
  • Carbon filler-based formula reaches peak performance instantly without burn-in
  • Non-conductive and non-capacitive paste eliminates short-circuit risk during application
  • Viscosity suited for direct-die GPU and console processor cooling
  • Authenticity check verifies 100% original product for each unit

Carbon filler thermal paste

The ARCTIC MX-6 is a carbon filler-based thermal compound supplied in an 8 g syringe. It reaches maximum performance immediately after application without any burn-in period. The paste uses a silicone gel carrier that spreads evenly under mounting pressure from a cooler or heatsink. It is designed for CPUs, GPUs, laptops and consoles.

Suited for direct-die and standard mounts

Builders who need a non-conductive paste for direct-die GPU or console processor applications will benefit from the viscosity. The formula eliminates the risk of short circuits or capacitive discharge on exposed circuitry. Users who require a paste with metal or diamond particles for specific conductivity targets should look at alternative formulations.

Fits standard syringe application

The 8 g volume covers multiple CPU or GPU installations with a single syringe. No curing time is required so the system can be stressed immediately after assembly. The authenticity check code on the packaging verifies the product is genuine. It requires only a clean surface and even pressure from the mounted cooler to achieve optimal distribution.

特長

  • 20% lower thermal resistance than MX-4 for better heat transfer
  • Carbon filler-based formula reaches peak performance instantly without burn-in
  • Non-conductive and non-capacitive paste eliminates short-circuit risk during application
  • Viscosity suited for direct-die GPU and console processor cooling
  • Authenticity check verifies 100% original product for each unit

仕様

BrandArctic
SeriesMX-6
ModelMX-6 8g
Part NumberACTCP00081A

このモデルの他のバージョン

同シリーズにさらに 2点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What surfaces can I apply the MX-6 8 g paste to?

The carbon filler-based compound works on CPU lids, GPU dies, console processors and laptop chips, and its viscosity suits direct-die mounting.

Is the MX-6 paste electrically conductive?

No, it is neither electrically conductive nor capacitive, so there is no risk of short circuits or discharges.

How do I verify the MX-6 tube is genuine?

Use the 100 % Authenticity Check on the packaging to confirm the product is original.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。