暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three small green circuit boards with pin headers on each long side

Arduino

Arduino Nano Every 3 Boards Pack development board

SKU CH-3KVD-PDWQP

A pack of three compact microcontroller boards based on the ATmega4809 running at 20 MHz with 48 KB flash and 6 KB SRAM

  • Compact 48 mm × 18 mm board fits tight enclosures
  • ATmega4809 at 20 MHz with 48 KB flash for responsive code
  • Pin-compatible dual 15-pin headers drop into existing Nano designs
  • Efficient DC-DC handles up to 21 V input and 950 mA output
  • Three boards in one pack accelerate multi-node prototypes

Compact microcontroller pack

The Arduino Nano Every 3 Boards Pack supplies three identical development boards based on the ATMega4809 AVR processor. Each board measures 48 mm by 18 mm and runs at 20 MHz with 48 KB flash, 6 KB SRAM and 256 byte EEPROM. The pack targets makers, students and engineers who need multiple units for prototyping or small-scale deployment.

Suited for embedded prototypes

The pin-to-pin compatibility with the classic Nano layout lets existing shield designs and breadboard wiring transfer directly. Projects that demand more I/O pins, built-in wireless connectivity, larger memory spaces or a different voltage domain will need a different platform.

21 V input tolerance

The on-board DC-DC converter accepts up to 21 V while delivering up to 950 mA to external peripherals without overheating. This wide supply range is the key specification that determines whether the board fits a given power architecture.

特長

  • Compact 48 mm × 18 mm board fits tight enclosures
  • ATmega4809 at 20 MHz with 48 KB flash for responsive code
  • Pin-compatible dual 15-pin headers drop into existing Nano designs
  • Efficient DC-DC handles up to 21 V input and 950 mA output
  • Three boards in one pack accelerate multi-node prototypes

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Do I need a USB cable with a specific connector to program each Nano Every board?

Each board uses a standard USB connection for power and programming; any cable that fits the onboard USB port will work.

Will the two 15-pin headers on the Nano Every match the pinout of my original Nano shields?

The headers are pin-to-pin compatible with the original Arduino Nano, so existing shields align directly.

How can I confirm the ATmega4809 is running at 20 MHz after I upload a sketch?

Upload a sketch that toggles an LED at a known rate; if the timing matches the code, the 20 MHz clock is active.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。