EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
ASRock
Refurbished Radeon RX 6800 XT with 16GB GDDR6, 4608 stream processors, 2360 MHz boost, triple-fan cooling, HDMI 2.1, dual DisplayPort 1.4 and USB-C
The ASRock Radeon RX 6800 XT Taichi is a refurbished GPU built on the AMD RDNA 2 architecture. It delivers 4608 stream processors with a 2360 MHz boost clock and 16GB of GDDR6 memory across a 256-bit bus. The card targets enthusiasts who want high-frame-rate 1440p or entry 4K gaming in a triple-fan design.
Moving to this 16GB model removes the VRAM ceiling that limits texture quality in modern titles. The 16 Gbps memory speed and PCI Express 4.0 interface feed the GPU faster than older 256-bit 8GB designs. The jump is worth it when your current card stutters at max settings or cannot drive a 7680 x 4320 display.
This card fits builders who have a 330 mm clearance case and an 800W power supply for the 300W TDP and three 8-pin connectors. The 2.8-slot width and 12.99 x 5.51 inch dimensions demand a spacious ATX chassis. Users with smaller cases, lower-wattage PSUs, or single-monitor 1080p needs should look at something else.
| Brand | ASRock |
|---|---|
| Series | Taichi |
| Model | RX6800XT TCX 16GO |
| Interface | PCI Express 4.0 |
| Chipset Manufacturer | AMD |
| GPU Series | AMD Radeon RX 6000 Series |
| GPU | Radeon RX 6800 XT |
| Core Clock | 1925 MHz |
| Boost Clock | 2360 MHz |
| Stream Processors | 4608 |
| Effective Memory Clock | 16 Gbps |
| Memory Size | 16GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1 VRR |
| DisplayPort | 2 x DisplayPort 1.4 with DSC |
| Other Ports | 1 x USB-C |
| Max Resolution | 7680 x 4320 |
| Eyefinity Support | Yes |
| Virtual Reality Ready | Yes |
| Cooler | Triple Fans |
| Thermal Design Power | 300W |
| Recommended PSU Wattage | 800W |
| Power Connector | 3 x 8-Pin |
| HDCP Ready | Yes |
| Features | Polychrome SYNC Taichi 3X Cooling System Striped Axial Fan Reinforced Metal Frame ARGB Metal Backplate 0dB Silent Cooling Dual BIOS Super Alloy Graphics Card |
| Form Factor | ATX |
| Max GPU Length | 330 mm |
| Card Dimensions (L x H) | 12.99" x 5.51" |
| Slot Width | 2.8-slot |
| 配送重量 | 2.86 kg |
| 梱包サイズ | 419 × 241 × 135 mm |
The card measures 330 mm long and occupies 2.8 slots, so the chassis must accept that length and width. A power supply of at least 800 W with three 8-pin PCIe cables is needed for the 300 W board.
Seat the board firmly in the top PCI Express 4.0 x16 slot until the retention latch clicks, then attach all three 8-pin connectors individually from the PSU — do not use a single daisy-chained cable.
Clean the three striped axial fans and heatsink fins with compressed air every few months to keep the 0 dB stop mode effective, and leave the dual BIOS switch in the default position unless troubleshooting.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?