暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Compact black metal switching power supply, 5.9 by 3.4 inches

Astron

Astron SS-10 Power Supply 110/220VA 12VDC 10A

SKU CH-J07D-H290H

Switching power supply delivering 12 V DC at up to 10 A with 115/230 V AC input, compact 5.9" × 3.4" chassis and built-in protection

  • TypeProprietary Power Supply
  • Delivers 12 V DC at 10 A intermittent duty
  • Accepts 115 V or 230 V AC input for worldwide use
  • Compact 5.9" height and 3.4" width fits tight enclosures
  • Built-in over-current and over-power protection safeguards connected gear
  • High-efficiency design keeps noise and ripple low

Compact Switching Supply for Legacy Replacements

The Astron SS-10 is a small switching power supply designed to replace several older legacy units. It delivers 12 VDC output for equipment requiring that voltage rail. The unit accepts 115 or 230 V AC input for broad mains compatibility. Its reduced depth helps it fit into tight enclosures where space is limited.

12 VDC Output with 10 A Intermittent Headroom

Continuous duty is rated at 7 amps while intermittent duty reaches 10 amps for short bursts. This headroom handles temporary load spikes without tripping protection. Over current and over power protection circuits shut down the supply if limits are exceeded. The supply runs out of capacity when sustained draw exceeds the continuous rating.

Proprietary Form Factor Limits Drop-In Use

The proprietary design measures 5.9 inches in height and 3.4 inches in width, so it only fits chassis cut-outs that match those dimensions. Input voltage selection between 110 and 220 VA ranges is fixed by the unit’s internal wiring. Builders needing a standard ATX form factor or different voltage rails cannot use this supply.

特長

  • Delivers 12 V DC at 10 A intermittent duty
  • Accepts 115 V or 230 V AC input for worldwide use
  • Compact 5.9" height and 3.4" width fits tight enclosures
  • Built-in over-current and over-power protection safeguards connected gear
  • High-efficiency design keeps noise and ripple low

仕様

TypeProprietary Power Supply

この商品に関する質問

Will the SS-10's 115/230 V input and 12 VDC 10 A output match the legacy power supply I am replacing?

The unit accepts 115 or 230 V AC input and delivers 12 V DC at up to 10 A intermittent duty, matching the ratings listed for the older supplies it is designed to replace.

How can I verify the SS-10 is operating correctly once installed?

Measure the output with a multimeter; it should read 12 V DC under load, and the built-in over-current and over-power protection will trip if limits are exceeded.

What comes in the box and what must I source separately?

The SS-10 power supply itself is included; AC input cord, DC output connectors and mounting hardware are not supplied and must be purchased separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。