OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
ASUS
Refurbished GeForce RTX 4060 Ti with 8 GB GDDR6 memory, PCIe 4.0 x8 interface, DLSS 3 support, 0dB fan technology, white 2.5-slot design and one HDMI 2.1a plus three DisplayPort 1.4a outputs
This graphics card is a refurbished ASUS Dual GeForce RTX 4060 Ti with 8 GB of GDDR6 memory on a 128-bit interface. It uses a PCI Express 4.0 x8 connection and fits a 2.5-slot ATX form factor measuring 227 mm long. The white shroud suits colour-coordinated systems while the dual axial-tech fans with 0dB technology stop completely under light loads.
The GPU has a 160 W thermal design power and draws auxiliary power through a single 8-pin connector. Under continuous load the axial-tech fan design increases downward air pressure through longer blades and a barrier ring, while dual ball bearings extend fan lifespan. 0dB mode keeps the fans off until temperatures rise, so noise stays low during extended sessions.
Verify that your case clears a 227 mm long, 2.5-slot card and that your power supply meets the 650 W recommendation with an available 8-pin PCIe connector. The board provides one HDMI 2.1a and three DisplayPort 1.4a outputs for up to four displays at 7680 x 4320 resolution. A PCIe 4.0 x8 slot is required for full bandwidth.
| Brand | ASUS |
|---|---|
| Series | Dual |
| Model | DUAL-RTX4060TI-8G-WHITE |
| Part Number | 90YV0J43-MVAA00 |
| Interface | PCI Express 4.0 x8 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 40 Series |
| GPU | GeForce RTX 4060 Ti |
| CUDA Cores | 4352 |
| Effective Memory Clock | 18000 MHz (18 Gbps) |
| Memory Size | 8GB |
| Memory Interface | 128-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1a |
| DisplayPort | 3 x DisplayPort 1.4a |
| Color | White |
| Max Resolution | 7680 x 4320 |
| Cooler | Double Fans |
| Thermal Design Power | 160W |
| Recommended PSU Wattage | 650W |
| Power Connector | 8-Pin |
| HDCP Ready | Yes |
| Form Factor | ATX |
| Max GPU Length | 227 mm |
| Slot Width | 2.5 Slots |
| 配送重量 | 1.70 kg |
| 梱包サイズ | 356 × 267 × 76 mm |
The Axial-tech fans stop completely below a set temperature so the card runs silently at idle and light loads; dual ball bearings extend fan life.
An 8-pin PCIe connector and a 650W power supply are recommended for stable operation.
The 2.5-slot design and 227mm length are built for broad ATX case compatibility while leaving room for adjacent slots.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?