暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Axiom

Axiom 8GB DDR4-2400 ECC SODIMM CL17 AX42400ES17Z/8G

SKU CH-7BBE-W5C07

8 GB DDR4-2400 ECC SODIMM laptop memory with CL17 latency and 1.20 V operation

  • ECC protection guards data integrity in critical workloads
  • 2400 MHz DDR4 speed delivers responsive laptop performance
  • CL17 latency timing supports efficient memory access
  • 20 V operation reduces power draw and heat
  • 260-pin SoDIMM form factor fits compatible notebook slots

ECC SODIMM for DDR4 Laptops

This Axiom module delivers 8 GB of DDR4-2400 memory with ECC error correction and a CAS latency of CL17. It operates at 1.20 V and uses the standard 260-pin SODIMM form factor. The stick conforms to the PC4-19200 standard and carries RoHS environmental certification.

Suited for ECC Workstations Not General Laptops

This memory suits mobile workstations or industrial laptops that require ECC support and DDR4-2400 speed. It will not benefit standard consumer notebooks that lack ECC capability in their chipset or BIOS. Buyers who need non-ECC modules or higher frequencies should look at alternative DDR4 SODIMMs.

Fits DDR4 SODIMM Slots with ECC Support

Installation requires a free 260-pin DDR4 SODIMM slot on a platform that explicitly enables ECC functionality. The 1.20 V voltage matches standard DDR4 power rails. Adding this module frees the system from single-channel constraints and provides error-corrected capacity for data-critical workloads.

特長

  • ECC protection guards data integrity in critical workloads
  • 2400 MHz DDR4 speed delivers responsive laptop performance
  • CL17 latency timing supports efficient memory access
  • 20 V operation reduces power draw and heat
  • 260-pin SoDIMM form factor fits compatible notebook slots

仕様

BrandAxiom

この商品に関する質問

Does my laptop need a 260-pin DDR4 SODIMM slot for this 8 GB module?

Yes — the module uses the 260-pin SODIMM form factor and DDR4 technology, so the system must provide a matching DDR4 SODIMM slot.

Can I add this ECC SODIMM alongside non-ECC DDR4-2400 sticks I already have?

Mixing ECC and non-ECC modules is not recommended; the memory controller will typically disable ECC or fall back to the lowest common speed and timing.

How can I verify the module runs at DDR4-2400 CL17 after installation?

Check the memory speed and CAS latency in BIOS/UEFI or a system-information tool such as CPU-Z; they should report 2400 MHz and CL17.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。