EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Axiom
A 32 GB DDR4-2933 ECC registered DIMM with CL21 latency for Dell servers
This Axiom module is a 32 GB DDR4-2933 registered DIMM with ECC and CL21 latency. It runs at 1.20 V and uses the standard 288-pin form factor for DDR4 server memory. The single-stick design delivers 32 GB in one slot.
It fits servers and workstations that require registered ECC DDR4 memory at 2933 MHz. Buyers whose platforms only accept unbuffered non-ECC modules should look at something else. Systems that cannot use registered DIMMs will not be compatible.
The registered ECC design combined with a 2933 MHz data rate is the single specification that determines whether this module works in a given system. Verify that the motherboard or server supports registered ECC DDR4 at this speed before ordering.
| Brand | Axiom |
|---|---|
| Speed | DDR4 SDRAM |
| CAS Latency | CL21 |
| ECC | ECC |
| Buffered/Registered | Registered |
| 配送重量 | 0.45 kg |
| 梱包サイズ | 25 × 25 × 25 mm |
The module runs at 2933 MT/s, giving a peak transfer rate of 23466 MB/s; actual bandwidth depends on the server's memory controller and channel population.
Yes — it is a standard 288-pin DDR4 RDIMM built to Dell's mechanical and electrical spec, so it seats in any compatible Dell DDR4 RDIMM slot.
Install the DIMM with the server powered off; most Dell platforms auto-detect ECC and registered mode, but verify the memory mode is not set to "Performance" or "Optimiser" which can disable ECC.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?