暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Axiom 3.5 inch SATA enterprise SSD with hot-swap tray

Axiom

Axiom SSDEV20DF1T9-AX enterprise SSD 1.92 TB SATA 3.5" hot-swap

SKU CH-KN6R-WXV8Y MPN SSDEV20DF1T9-AX

1.92 TB SATA hot-swap enterprise SSD with 510 MB/s read and 475 MB/s write speeds for 3.5-inch server bays

  • 92 TB capacity stores large enterprise datasets
  • 510 MB/s max read speed accelerates data access
  • 475 MB/s max write speed supports intensive workloads
  • Hot-swap 3.5" design enables drive replacement without downtime
  • SATA 600 interface integrates with existing server infrastructure

Enterprise SATA SSD for hot-swap bays

This 3.5-inch solid-state drive fits hot-swap trays in servers and storage arrays. It delivers 1.92 TB of capacity over a SATA 6 Gb/s link. The drive is built for read-intensive enterprise workloads where consistent uptime matters.

1.92 TB capacity with 510 MB/s read

Sequential reads reach 510 MB/s and writes reach 475 MB/s, giving ample headroom for boot volumes, logging and mixed read-heavy datasets. Random write-heavy workloads or sustained sequential streaming beyond these rates will saturate the SATA interface.

Replaces mechanical 3.5-inch HDDs in hot-swap

The drive drops into existing 3.5-inch hot-swap bays without cabling changes, removing spinning-media latency and vibration risk. The jump is worth it when faster boot, quicker rebuilds and lower power draw outweigh the cost per terabyte of hard drives.

特長

  • 92 TB capacity stores large enterprise datasets
  • 510 MB/s max read speed accelerates data access
  • 475 MB/s max write speed supports intensive workloads
  • Hot-swap 3.5" design enables drive replacement without downtime
  • SATA 600 interface integrates with existing server infrastructure

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the 3.5" SATA 600 interface work in my older server backplane that only supports 3 Gb/s?

The drive uses SATA 600 and is backward compatible with 3 Gb/s backplanes, so it will operate at the slower link speed without any configuration changes.

How can I confirm the drive is delivering its rated 510 MB/s read and 475 MB/s write speeds after installation?

Run a sequential read/write benchmark such as CrystalDiskMark or fio; sustained results near 510 MB/s read and 475 MB/s write indicate the drive is performing to specification.

Does the hot-swap tray ship with the 1.92 TB drive or must I order it separately?

The 3.5" hot-swap drive includes the carrier tray; no additional tray or mounting hardware is required for standard server bays.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。