Axiom
Axiom SSDEV20HB3T8-AX 3.84 TB SATA 2.5" enterprise SSD
Enterprise SATA SSD with 3.84 TB capacity, 540 MB/s reads and 480 MB/s writes in a hot-swappable 2.5" form factor
- 84 TB capacity stores large enterprise datasets
- 540 MB/s read speed accelerates data access
- 480 MB/s write speed handles intensive workloads
- Hot-swappable 2.5" SATA design enables zero-downtime replacement
- RoHS compliant with 3-year limited warranty
Axiom 3.84 TB SATA Enterprise SSD
The Axiom SSDEV20HB3T8-AX is a 3.84 TB internal solid-state drive built for server and storage arrays. It uses a SATA 6 Gbit/s interface in a 2.5-inch form factor and supports hot-swap installation. Sequential reads reach 540 MB/s and writes reach 480 MB/s. The drive carries RoHS certification and a three-year limited warranty.
Suited for SATA hot-swap bays needing 3.84 TB
This SSD fits administrators expanding or refreshing SATA-based arrays that accept 2.5-inch hot-swappable drives. It is not suited for systems that require a PCIe interface or a different physical connector, nor for workloads demanding higher throughput than the SATA 6 Gbit/s link provides. Buyers needing a smaller or larger capacity should consider other models.
SATA 6 Gbit/s interface decides compatibility
The single specification that determines fit is the SATA 6 Gbit/s interface combined with the 2.5-inch hot-swap form factor. Only platforms with matching SATA backplanes and drive cages can use this drive. Verify the host system supports SATA 6 Gbit/s and 2.5-inch hot-swap trays before purchase.
特長
- 84 TB capacity stores large enterprise datasets
- 540 MB/s read speed accelerates data access
- 480 MB/s write speed handles intensive workloads
- Hot-swappable 2.5" SATA design enables zero-downtime replacement
- RoHS compliant with 3-year limited warranty
仕様
| Brand | Axiom |
|---|---|
| 配送重量 | 0.45 kg |
| 梱包サイズ | 25 × 25 × 25 mm |
この商品に関する質問
Does the 540 MB/s read speed generate noticeable heat inside a 2.5" bay during continuous use?
The EV200 is rated for 540 MB/s sequential read and 480 MB/s write over a SATA 600 link, and its 2.5" hot-swappable form factor is designed for standard enterprise drive bays with normal airflow.
Will this SSD work in my existing server if I only have SATA backplanes and no extra adapters?
It connects directly to any SATA 600 backplane or controller using the standard 2.5" SATA connector; no caddies, interposers or protocol converters are required.
Can I mix this 3.84 TB drive with older 200 GB SATA SSDs in the same RAID array?
Yes, both use the SATA interface and 2.5" form factor, so the controller will see them as regular SATA devices, though the array will be limited by the smallest drive capacity.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
HP 628059-B21 3TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 3.0Gb/s
Seagate Cheetah 10K.7 ST3300007LC 300GB 10000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive
- Bare Drive
- SCSI Ultra320 80pin
IBM 49Y2003 600GB 2.5" SAS 10000 RPM 16MB internal hard drive
- SAS 6Gb/s
- 10000 RPM



