暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold contacts

Axiom

Axiom T9V40AA-AX 16GB DDR4 2400MHz CL17 ECC Registered DIMM server RAM

SKU CH-SXFC-QEMYY MPN T9V40AA-AX

Adds 16 GB of DDR4 ECC registered memory at 2400 MHz with CL17 timing and 1.2 V operation

  • ECC protection guards data integrity
  • Registered signal processing stabilises heavy workloads
  • DDR4 2400 MHz speed delivers 19200 MB/s bandwidth
  • CL17 latency at 1.2 V keeps power draw low
  • 288-pin DIMM fits HP Z440 Z640 Z840 workstations

Purpose-built server memory

The Axiom T9V40AA-AX is a single 16 GB DDR4 module designed for HP Z440, Z640 and Z840 workstations. It targets administrators who need registered ECC stability in a 2400 MHz DIMM.

Capacity and headroom

One 16 GB stick provides PC4-19200 bandwidth at CL17 latency. Registered signal processing and ECC error checking protect data integrity under sustained multi-threaded workloads, while the 1.2 V operating voltage limits power draw. The module fills one 288-pin slot and suits configurations that do not exceed the platform's maximum registered DIMM count.

DDR4-2400 interface limits

The DDR4-2400 standard caps transfer rates at 2400 MT/s, so throughput cannot scale beyond PC4-19200 regardless of CPU capability. Registered buffering adds a cycle of latency versus unbuffered alternatives, and the fixed CL17 timing prevents tighter manual tuning. Builders requiring higher frequencies or lower latencies must select a different memory standard.

特長

  • ECC protection guards data integrity
  • Registered signal processing stabilises heavy workloads
  • DDR4 2400 MHz speed delivers 19200 MB/s bandwidth
  • CL17 latency at 1.2 V keeps power draw low
  • 288-pin DIMM fits HP Z440 Z640 Z840 workstations

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will this 2400 MHz registered ECC DIMM run at full speed alongside slower DDR4 modules already in my HP Z440?

The module is rated for DDR4-2400/PC4-19200 at CL17; when mixed with slower DDR4 the system will clock all sticks down to the lowest common speed, so full 2400 MHz performance is only guaranteed if every installed DIMM supports that rate.

How can I confirm the 16 GB stick is detected with ECC active after installation?

Enter the workstation BIOS or UEFI and verify the memory summary shows 16 GB at 2400 MHz with ECC enabled; most HP Z440, Z640 and Z840 firmware also logs a successful ECC scrub during POST.

Does the single 288-pin DIMM ship with a heat-spreader or any installation hardware?

The package contains only the 1 x 16 GB registered ECC DIMM itself; no heat-spreader, screws or tools are included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。