暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Metal bracket with offset holes for mounting a pump on a 140mm radiator

Barrow Mods

Barrow Mods Offset Pump Mounting Bracket 140mm Radiator

SKU CH-6MVF-N7QP0

Mounts D5 or DDC pumps to 140 mm, 280 mm or 420 mm radiators with 50 mm M4 hole spacing and elevated clearance

  • TypePump
  • Mounts D5 or DDC pumps to 140mm, 280mm, 420mm radiators
  • 50 x 50mm M4 hole spacing fits most pump tops
  • Multiple M4 width slots give flexible mounting positions
  • Elevated design adds clearance between pump and radiator
  • Single bracket includes all needed hardware for installation

Pump bracket for 140 mm radiators

The Barrow Mods offset bracket mounts a D5 or DDC pump onto a 140 mm, 280 mm or 420 mm radiator. It uses 50 x 50 mm M4 hole spacing and includes additional M4 slots for flexible positioning. The elevated design increases clearance between the pump and the radiator.

For custom-loop builders needing offset pump

Suits builders who want to attach a standard D5 or DDC pump top to a 140 mm-based radiator without custom machining. Not for loops that require an integrated pump-reservoir unit or a different mounting pattern.

50 x 50 mm M4 hole spacing

This spacing matches most common D5 and DDC pump tops, making it the single specification that decides compatibility. Verify your pump top uses the same hole pattern before purchasing.

特長

  • Mounts D5 or DDC pumps to 140mm, 280mm, 420mm radiators
  • 50 x 50mm M4 hole spacing fits most pump tops
  • Multiple M4 width slots give flexible mounting positions
  • Elevated design adds clearance between pump and radiator
  • Single bracket includes all needed hardware for installation

仕様

TypePump

この商品に関する質問

Does the elevated bracket design change pump noise or heat when the loop runs all day?

The bracket only spaces the pump away from the radiator for clearance; it has no active cooling or damping, so pump noise and heat stay exactly as the pump itself produces.

Which pump tops and radiators must I already own for this bracket to fit?

You need a D5 or DDC pump top with the standard 50 x 50 mm M4 hole pattern and a 140 mm, 280 mm or 420 mm radiator that accepts 140 mm fan mounting holes.

Will the bracket clear older D5 tops that have taller motor housings?

Yes, the elevated stance adds extra vertical room between the radiator and the pump top, helping accommodate taller legacy D5 housings.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。